Septic tanks are the most known primary treatment systems due to their lower cost, operation, and maintenance requirements, particularly in developing communities where the majority of the population lives in rural communities. In Australia, approximately 12% of the population uses septic tanks for domestic wastewater treatment. Similarly, in Greece, around 14% of the population relies on decentralized systems. Likewise, in the USA, 60 million people are served by different decentralized wastewater systems out of which 20 million use septic tanks. These tanks must be cleaned on a regular basis, which is typically between three and ten years. Septage, which is the solid and liquid material that is removed from a septic tank or septic system during the process of cleaning or desludging the tank, is a nutrient-rich material. Nitrogen recovery from septage can be achieved through ion exchange, membrane separation, electrochemical systems, and nutrient upconcentration. On the other hand, septage is also a phosphorus-rich material. Crystallization, adsorption, and electrochemical precipitation, among others, are the most common technologies for phosphorus recovery from septage. Additionally, septage can be anaerobically digested to produce biogas, which can then be used to generate electricity. The process resulted in the reduction of greenhouse gas emissions and the production of a nutrient-rich digestate that could be used as a fertilizer. This chapter discusses the potential reuse of water and septage, the resource/nutrient recovery during wastewater treatment, as well as the advantages and challenges of the processes. <!----> <!----> <!----> <!---->