The use of rattan and bamboo fibers increases the compressive strength, tensile strength and improves the ductility of concrete. Shell ash also contains pozzolanic compounds that can improve the properties of concrete. In this study, rattan and bamboo were used as concrete fibers and seashell ash was used as filler. The purpose of this study is to measure the compressive and tensile strength of concrete. In this study, rattan and bamboo fibers were added to the concrete mix with a mix design 25MPa. The additive variation is 0%, 0.5%, 1%, 1.5%, 2%. The results showed that the average compressive strength at 28 days was 0.26.29 MPa, 0.5, 19.71 MPa, 1.21.69 MPa, 1.5, 24.72 MPa and 2.18 MPa. Accordingly, the average tensile strength after 28 days was 0.736 MPa, 2,359 MPa, 2,312 MPa, 2.453 MPa and 2,595 MPa. These results show that the addition of rattan and bamboo fibers to concrete can increase the crack resistance of concrete, while the optimal increase in compressive strength with the addition of rattan fiber is achieved only with the change of 1.5%. This indicates that the addition of 1.5% natural fibers improves the tensile strength of concrete.
1 July 2021 in IOP Conference Series: Earth and Environmental Science
Concrete is high in compressive strength but low in tensile strength and very brittle material. In this study, rattan fibre used as an added material to help eliminate the brittle properties of normal concrete. Variations of fibre used consisted of 0%, 0.5%, 1%, 1.5%, and 2% by weight of cement with mixed planning using the American Concrete Institute method. The compressive strength and stress-strain tests were carried out when the concrete was 28 days old, with a design compressive strength of 25 MPa as many as 15 pieces. The value resulting from testing on normal concrete without the addition of fibres is 24.94 MPa, 0.5% variation of rattan fibres is 23.23 MPa, 1% variation of rattan fibre is 25.3 MPa, 1.5% variation of rattan fibre is 25.85 MPa, 2% variation of rattan fibre is 23.59 MPa. Normal concrete compressive strength test showed an increase in strength at 1.5% rattan fibre and decreased at an additional 2%. The result of stress-strain test in normal concrete without rattan fibre is 0.00125, 0.5% of 0.00254, 1% of 0.00067, 1.5% of 0.00053, 2% of 0.00333. The stress-strain test shows that the addition of rattan fibre can help eliminate the brittle properties that are lacking in normal concrete in general.
1 January 2023 in Research on Engineering Structures and Materials
Agricultural land has a strategic role and function for the agrarian society of Indonesia. This is because many Indonesians depend on the agricultural sector for their livelihoods. In sustainable agricultural development land is the most important natural resource and changes in land use are inevitable because the amount does not increase but the needs always increase. This land use change also occurs in Aceh Province, especially in Nagan Raya District. Therefore, it is necessary to analyze and predict land changes in order to evaluate the suitability of land management, land use planning, reduce potential conflicts in use, and land utilization for the common good in the future. Cellular Automata-Marcov Chain Algorithm (CA-MC) is one way that can be applied to overcome the problem of land use change in Nagan Raya Regency. Land use conversion significantly impacted primary dry land, particularly through plantation expansion. Spatiotemporal analysis using CA-MC models revealed significant shifts in land cover between 2000 and 2040. Dryland forests decreased, while plantation land, settlements, open land, and water bodies increased. The CA-MC model effectively simulated these changes, providing valuable insights for urban planning and management.
Pozzolan is a material that increases the strength of concrete. The pozzolan used in this study is mussel shell powder. The purpose of this study was to find out how MSP substitution affects concrete strength. Mussel shell powder (MSP) contains important levels of calcium oxide and silicon oxide (SiO2) and used as an alternative to Portland cement (PC) to reduce the amount of PC needed to make concrete will perform. The concrete designed according to the Standard Indonesian Method (SNI) and the slump should be between 75mm and 100mm. As a prototype, he built a concrete cylinder measuring 15 cm x 30 cm. The percentage changes when replacing PC with MSP were 0%, 2%, 4%, 6%, and 8%, respectively, with 0% substitute used as the control mixture. The samples evaluated for compressive and tensile strength after 7 and 28 days, respectively. As a result, in terms of compressive strength, the best replacement level for 28-day-old concrete is 6%, with a strength value of 32.46MPa. This resulted in a 21.98% increase in force compared to control. In contrast, replacing 2% PC with MSP achieved the highest shear strength after 28 days, with a strength value of about 2.584MPa, 10.48% higher than witnessed. The two samples all have slightly different chemical group bonds O-H, CH2, and C-H. The absorption range of the chemical bond of alkene is 1638.21cm-1, and group functional C=O of shell concrete of 1638.21cm-1. The group functional of C=O in the sample, but there is no functional group C in the shell.