Commercial hyperspectral imaging systems typically use CCD or CMOS sensors. These types of sensors have a limited dynamic range and non-linear response. This means that when evaluating an artwork under uncontrolled lighting conditions and with light and dark areas in the same scene, hyperspectral images with underexposed or saturated areas would be obtained at low or high exposure times, respectively. To overcome this problem, this article presents a system for capturing hyperspectral images consisting of a matrix of twelve spectral filters placed in twelve cameras, which, after processing these images, makes it possible to obtain the high dynamic range image to measure the spectral reflectance of the work of art being evaluated. We show the developed system and describe all its components, calibration processes, and the algorithm implemented to obtain the high dynamic range spectral reflectance measurement. In order to validate the system, high dynamic range spectral reflectance measurements from Labsphere’s Spectralon Reflectance Standards were performed and compared with the same reflectance measurements but using low dynamic range images. High dynamic range hyperspectral imaging improves the colorimetric accuracy and decreases the uncertainty of the spectral reflectance measurement based on low dynamic range imaging.
The virtual modification of the appearance of an object using lighting technologies has become very important in recent years, since the projection of light on an object allows us to alter its appearance in a virtual and reversible way. Considering the limitation of non-contact when analysing a work of art, these optical techniques have been used in fields of restoration of cultural heritage, allowing us to visualize the work as it was conceived by its author, after a process of acquisition and treatment of the image. Furthermore, the technique of altering the appearance of objects through the projection of light has been used in projects with artistic or even educational purposes. This review has treated the main studies of light projection as a technique to alter the appearance of objects, emphasizing the calibration methods used in each study, taking into account the importance of a correct calibration between devices to carry out this technology. In addition, since the described technique consists of projecting light, and one of the applications is related to cultural heritage, those studies that carry out the design and optimization of lighting systems will be described for a correct appreciation of the works of art, without altering its state of conservation.
It is increasingly necessary to generate accessible and navigable digital representations of historical or heritage buildings. This article explains the workflow that was applied to create such a digital component for one of the least accessible areas of the Alhambra palace in Granada, the so-called Torre de la Cautiva (Tower of the Captive). The main goal of this process was to create affordable, photorealistic 3D models that contribute to the dissemination of cultural heritage, the decision making for its conservation and restoration, and public engagement and entertainment. With enough preparation, the time spent gathering data following a Structure from Motion (SfM) approach can be significantly reduced by using a multi-camera (low cost DSLR) photogrammetric strategy. Without the possibility of artificial lighting, it was essential to use RAW images and calibrate the color in the scene for material and texture characterization. Through processing, the amount of data was reduced by optimizing the model’s topology. Thus, a photorealistic result was obtained that could be managed and visualized in immersive Visual Reality (VR) environments, simulating different historical periods and environmental and lighting conditions. The potential of this method allows, with slight modifications, the creation of HBIMs and the adaptation to VR systems development, whose current visualization quality is below the resolution of actionable models in rendering engines.
Restorers and curators in museums sometimes find it difficult to accurately segment areas of paintings that have been contaminated with other pigments or areas that need to be restored, and work on the painting needs to be carried out with minimum possible damage. It is therefore necessary to develop measurement systems and methods that facilitate this task in the least invasive way possible. The aim of this study was to obtain high-dynamic-range (HDR) spectral reflectance and spatial resolution for Dalí’s painting entitled Two Figures (1926) in order to segment a small area of black and white pigment that was affected by the contact transfer of reddish pigment from another painting. Using Hypermatrixcam to measure the HDR spectral reflectance developed by this research team, an HDR multispectral cube of 12 images was obtained for the band 470–690 nm in steps of 20 nm. With the values obtained for the spectral reflectance of the HDR cube, the colour of the area of paint affected by the transfer was studied by calculating the a*b* components with the CIELab system. These a*b* values were then used to define two methods of segmenting the exact areas in which there was a transfer of reddish pigment. The area studied in the painting was originally black, and the contamination with reddish pigment occupied 13.87% to 32% of the total area depending on the selected method. These different solutions can be explained because the lower limit is segmentation based on pure pigment and the upper limit considers red as an exclusion of non-black pigment. Over- and under-segmentation is a common problem described in the literature related to pigment selection. In this application case, as red pigment is not original and should be removed, curators will choose the method that selects the highest red area.