The consideration of ultra-wideband (UWB) and mm-wave signals allows for a channel description decomposed into specular multipath components (SMCs) and dense/diffuse multipath. In this paper, the amplitude and phase of SMCs are studied. Gaussian Process regression (GPR) is used as a tool to analyze and predict the SMC amplitudes and phases based on a measured training data set. In this regard, the dependency of the amplitude (and phase) on the angle-of-arrival/angle-of-departure of a multipath component is analyzed, which accounts for the incident angle and incident position of the signal at a reflecting surface—and thus for the reflection characteristics of the building material—and for the antenna gain patterns. The GPR model describes the similarities between different data points. Based on its model parameters and the training data, the amplitudes of SMCs are predicted at receiver positions that have not been measured in the experiment. The method can be used to predict a UWB channel impulse response at an arbitrary position in the environment.
Ultra-Wide Bandwidth (UWB) and mm-wave radio systems can resolve specular multipath components (SMCs) from estimated channel impulse response measurements. A geometric model can describe the delays, angles-of-arrival, and angles-of-departure of these SMCs, allowing for a prediction of these channel features. For the modeling of the amplitudes of the SMCs, a data-driven approach has been proposed recently, using Gaussian Process Regression (GPR) to map and predict the SMC amplitudes. In this paper, the applicability of the proposed multipath-resolved, GPR-based channel model is analyzed by studying features of the propagation channel from a set of channel measurements. The features analyzed include the energy capture of the modeled SMCs, the number of resolvable SMCs, and the ranging information that could be extracted from the SMCs. The second contribution of the paper concerns the potential applicability of the channel model for a multipath-resolved, single-anchor positioning system. The predicted channel knowledge is used to evaluate the measurement likelihood function at candidate positions throughout the environment. It is shown that the environmental awareness created by the multipath-resolved, GPR-based channel model yields higher robustness against position estimation outliers.