This paper presents a low-cost novel motion tracking system using linear optical sensor arrays supplemented by a 9DOF inertial measurement unit. Each pair of the linear sensor modules is capable of tracking the 2D location of an active infrared LED light source (marker). The presented tracking system combines two of these modules to realize spatial position tracking of the LED light source. The proposed system efficiently amalgamates inertial data with optical tracking estimates to extract attitude, minimize power requirement, and improve positional accuracy. The tracking system enables high-speed, high-accuracy, and low-cost position and attitude tracking for a wide range of applications. The detailed hardware design and performance evaluation experiments of this approach are also reported. The performance of the proposed tracking system was evaluated by measuring the tracking error with respect to known trajectories of the LED light source from different distances.
This paper presents the design, analysis, and experimental validation of a miniature modular inchworm robot (MMIR). Inchworm robots are capable of maneuvering in confined spaces due to their small size, a desirable characteristic for surveillance, exploration and search and rescue operations. This paper presents two generations of the MMIR (Version 1—V1 and Version 2—V2) that utilize anisotropic friction skin and an undulatory rectilinear gait to produce locomotion. This paper highlights design improvements and a multi-body dynamics approach to model and simulate the system. The MMIR V2 incorporates a slider-crank four-bar mechanism and a relative body revolute joint to produce high-frequency relative translation and rotation to increase forward velocity and enable turning capabilities. Friction analysis and locomotion experiments were conducted to assess the systems performance on various surfaces, validate the dynamic model and simulation results, and measure the maximum forward velocity. The MMIR V1 and V2 were able to achieve maximum forward velocities of 12.7 mm/s and 137.9 mm/s, respectively. These results are compared to reported results of similar robots published in the literature.
27 August 2019 in IEEE/ASME Transactions on Mechatronics
This paper analyzes how a multisegment, articulated serpentine tail can enhance the maneuvering and stability of a quadrupedal robot. A persistent challenge in legged robots is the need to account for propulsion, maneuvering, and stabilization considerations when generating control inputs for multidegree-of-freedom spatial legs. Looking to nature, many animals offset some of this required functionality to their tails to reduce the required action by their legs. By including a robotic tail on-board a legged robot, the gravitational and inertial loading of the tail can be utilized to provide for the robot's maneuverability and stability, while the legs primarily provide the robot's propulsion. System designs for the articulated serpentine tail and quadrupedal platform are presented, along with the dynamic models used to represent these systems. Outer-loop controllers that implement the desired maneuvering and stabilizing behaviors are discussed, along with an inner-loop controller that maps the desired tail trajectory into motor torque commands for the tail. Case studies showing the tail's ability to modify yaw-angle heading during locomotion (maneuvering) and to reject a destabilizing external disturbance in the roll direction (stabilization) are considered. Simulation results utilizing the tail's dynamic model and experimental results utilizing the tail prototype, in conjunction with the simulated quadrupedal platform, are generated. Successful maneuvering and stabilization are demonstrated by the simulated results and validated through experimentation.
This paper presents an instrumentation system developed for off-ship measurement of ship air wakes using an instrumented radio controlled (RC) helicopter. We propose the use of an IMU as a sensor to measure air wake in the form of induced vibrations on the helicopter while it maneuvers through regions of active air wake. The proposed system makes use of Back Propagation neural networks to compensate for the vibrational noise contributed by pilot inputs. The instrumentation system was tested on a modified training vessel in the Chesapeake Bay, which provided a wide range of wind conditions.
About Me
Sr. System Integration Engineer,
GM Cruise LLC
1201 Bryan St. San Francisco 94103 CA
Sr. System Integration Engineer,
GM Cruise LLC
1201 Bryan St. San Francisco 94103 CA