Anna Sowińska-Baranowska

Dr. Anna Sowińska-Baranowska

Chemistry, Institute of Polymer and Dye Technology of Lodz University of Technology, Łódź, Łódzkie, Poland
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
Verified
Journal Article
Open access
PDF file
Anna Sowińska-BaranowskaAnna Sowińska-Baranowska
Anna Sowińska-Baranowska
Magdalena MaciejewskaMagdalena Maciejewska
Magdalena Maciejewska
PDPaulina Duda
Paulina Duda
The goal of this study was application of corn starch and ground walnut shells in various amounts by weight as biofillers of natural rubber (NR) biocomposites. Additionally, ionic liquid 1-butyl-3-methylimidazolium chloride (BmiCl) and (3-aminopropyl)-triethoxysilane (APTES) were used to increase the activity of biofillers and to improve the curing characteristics of NR composites. The effect of biofillers used and their modification with aminosilane or ionic liquid on the curing characteristics of NR composites and their functional properties, including crosslink density, mechanical properties in static and dynamic conditions, hardness, thermal stability and resistance to thermo-oxidative aging were investigated. Starch and ground walnut shells were classified as inactive fillers, which can be used alternatively to commercial inactive fillers, e.g., chalk. BmiCl and APTES were successfully used to support the vulcanization and to improve the dispersion of biofillers in NR elastomer matrix. Vulcanizates with starch, especially those containing APTES and BmiCl, exhibited improved tensile properties due to the higher crosslink density and homogenous dispersion of starch, which resulted from BmiCl addition. NR filled with ground walnut shells demonstrated improved resistance to thermo-oxidative aging. It resulted from lignin present in walnut shells, the components of which belong to polyphenols, that have an antioxidant activity.

21 October 2019 in Polymers
Verified
Journal Article
Open access
PDF file
Magdalena MaciejewskaMagdalena Maciejewska
Magdalena Maciejewska
Anna Sowińska-BaranowskaAnna Sowińska-Baranowska
Anna Sowińska-Baranowska
JKJudyta Kucharska
Judyta Kucharska
Organic zinc salts and complexes were applied as activators for sulfur vulcanization of styrene–butadiene elastomer (SBR) in order to reduce the content of zinc ions in rubber compounds as compared with conventionally used zinc oxide. In this article, the effects of different organic zinc activators on the curing characteristics, crosslink densities, and mechanical properties of SBR as well as the aging resistance and thermal behavior of vulcanizates are discussed. Organic zinc salts seem to be good substitutes for zinc oxide as activators for sulfur vulcanization of SBR rubber, without detrimental effects to the vulcanization time and temperature. Moreover, vulcanizates containing organic zinc salts exhibit higher tensile strength and better damping properties than vulcanizate crosslinked with zinc oxide. The application of organic zinc activators allows the amount of zinc ions in SBR compounds to be reduced by 70–90 wt % compared to vulcanizate with zinc oxide. This is very important for ecological reasons, since zinc oxide is classified as being toxic to aquatic species.

19 May 2021 in Polymers
Verified
Journal Article
Open access
PDF file
Magdalena MaciejewskaMagdalena Maciejewska
Magdalena Maciejewska
Anna Sowińska-BaranowskaAnna Sowińska-Baranowska
Anna Sowińska-Baranowska
This work concerns the effect of fillers and ionic liquids on the cure characteristics of natural rubber (NR) compounds, as well as the mechanical and thermal properties of the vulcanizates. Three types of white filler were applied, such as cellulose, nanosized silica and hydrotalcite, to modify the performance of NR composites. Additionally, ionic liquids (ILs) with bromide anion and different cations, i.e., 1-butyl-3-methylimidazolium (Bmi) and 1-butyl-3-methylpyrrolidinium (Bmpyr), were used to improve the cure characteristics of NR compounds and functional properties of the vulcanizates. The type of filler and the structure of ILs were proved to affect the rheometric properties and cure characteristics of NR compounds as well as the performance of the NR vulcanizates. Owing to the adsorption of curatives onto the surface, silica reduced the activity of the crosslinking system, prolonging the optimal vulcanization time of NR compounds and reducing the crosslinking degree of the elastomer. However, silica-filled NR exhibited the highest thermal stability. Hydrotalcite increased the crosslink density and, consequently, the mechanical properties of the vulcanizates, but deteriorated their thermal stability. ILs beneficially influenced the cure characteristics of NR compounds, as well as the crosslink density and mechanical performance of the vulcanizates, particularly those filled with silica. Cellulose did not significantly affect the vulcanization of NR compounds and crosslink density of the vulcanizates compared to the unfilled elastomer, but deteriorated their tensile strength. On the other hand, cellulose improved the thermal stability and did not considerably alter the damping properties of the vulcanizates.

Verified
Journal Article
Open access
PDF file
Anna Sowińska-BaranowskaAnna Sowińska-Baranowska
Anna Sowińska-Baranowska
Magdalena MaciejewskaMagdalena Maciejewska
Magdalena Maciejewska
AGAnna Grajewska
Anna Grajewska
The goal of this work was to apply ionic liquids (ILs) with bis(trifluoromethylsulfonyl)imide anion (TFSI) for fine-tuning the cure characteristics and physico-chemical properties of elastomer composites based on a biodegradable natural rubber (NR) matrix. ILs with TFSI anion and different cations, such as alkylpyrrolidinium, alkylammonium, and alkylsulfonium cations, were applied to increase the efficiency of sulfur vulcanization and to improve the performance of NR composites. Thus, the influence of ILs on the vulcanization of NR compounds, as well as crosslink density and physical properties of NR vulcanizates, including tensile properties, thermal stability, and resistance to thermo-oxidative aging was explored. The activity of ILs seems to be strongly dependent on their cation. Pyrrolidinium and ammonium ILs effectively supported the vulcanization, reducing the optimal vulcanization time and temperature of NR compounds and increasing the crosslink density of the vulcanizates. Consequently, vulcanizates with these ILs exhibited higher tensile strength than the benchmark without IL. On the other hand, sulfonium ILs reduced the torque increment owing to the lower crosslinking degree of elastomer but significantly improved the resistance of NR composites to thermo-oxidation. Thus, TFSI ILs can be used to align the curing behavior and performance of NR composites for particular applications.

27 March 2019 in Journal of Thermal Analysis and Calorimetry
Verified
Journal Article
Open access
PDF file
Magdalena MaciejewskaMagdalena Maciejewska
Magdalena Maciejewska
Anna Sowińska-BaranowskaAnna Sowińska-Baranowska
Anna Sowińska-Baranowska
Different thermal analysis techniques were used to study the effect of fillers and ionic liquids (ILs) on the vulcanization process, thermal and dynamic mechanical properties of acrylonitrile–butadiene elastomer (NBR). The products of the studies were composites of NBR filled with hydrotalcite, nanosized silica or carbon black. ILs such as 1-butyl-1-methylpyrrolidinium (BMpyrrolBF4), 1-butyl-4-methylpyridinium (BMpyrBF4) or 1-butyl-1-methylpiperidinium (BMpipBF4) tetrafluoroborates were applied to improve the dispersion degree of the curatives and filler particles in the elastomer and to increase the efficiency of vulcanization. The differential scanning calorimetry results indicated that ILs reduced the vulcanization temperature of NBR compounds and increased the homogeneity of cross-link distribution in the elastomer network. NBRs filled with carbon black or silica exhibited similar thermal stabilities, whereas hydrotalcite reduced the temperature of thermal decomposition. The lowest mechanical loss factors were determined for vulcanizates filled with nanosized silica.

14 September 2021 in Materials
Verified
Journal Article
Open access
PDF file
Anna Sowińska-BaranowskaAnna Sowińska-Baranowska
Anna Sowińska-Baranowska
Magdalena MaciejewskaMagdalena Maciejewska
Magdalena Maciejewska
In this work, we present the effect of silica’s specific surface area (180 m2·g−1 and 380 m2·g−1, respectively) on the crosslinking of styrene–butadiene rubber (SBR) composites, as well as their crosslink density and functional properties, such as thermal stability, damping behavior, resistance to thermo-oxidative aging, and tensile properties. Ionic liquids (ILs) with a bromide anion and different cations, i.e., 1-butyl-3-methylimidazolium (Bmi), 1-butyl-3-methylpyrrolidinium (Bmpyr), and 1-butyl-3-methylpiperidinium (Bmpip), were used to enhance the cure characteristics of SBR compounds and the functional properties of SBR vulcanizates. It was proven that apart from the silica’s specific surface area, the filler–polymer and filler–filler physical interactions have a significant impact on the vulcanization kinetics of silica-filled SBR composites. Additionally, the performed studies have shown that ILs positively affected the dispersion of silica’s particles and reduced their ability to form agglomerates in the elastomer matrix, which enhanced the functional properties of the SBR vulcanizates.