The power-split architecture is the most promising hybrid electric powertrain. However, a real advantage in energy saving while maintaining high performance can be achieved only by the implementation of a proper energy management strategy. This requires an optimized functional design before and a comprehensive analysis of the powertrain losses after, which could be rather challenging owing to the constructive complexity of the power-split transmission, especially for multi-mode architecture with multiple planetary gearing. This difficulty was overcome by a dimensionless model, already available in the literature, that enables the analysis of any power-split transmission, even in full electric operation. This paper relies on this approach to find the operating points of the internal combustion engine and both electric machines which minimize the total power losses. This optimization is carried out for given vehicle speed and demanded torque, by supposing different scenarios in respect of the battery capability of providing or gathering power. The efficiency of the thermal engine and the electric machines is considered, as well as the transmission mechanical power losses. The aim is to provide a global efficiency map that can be exploited to extract data for the implementation of the most suitable real-time control strategy. As a case study, the procedure is applied to the multi-mode power-split system of the Chevrolet Volt.
Although free vibrations of thin-walled cylinders have been extensively addressed in the relevant literature, finding a good balance between accuracy and simplicity of the procedures used for natural frequency assessment is still an open issue. This paper proposes a novel approach with a high potential for practical application for rapid esteem of natural frequencies of thin-walled cylinders under different boundary conditions. Starting from Donnell–Mushtari’s shell theory, the differential problem is simplified by using the principle of virtual work and introducing the flexural waveforms of a beam as constrained as the cylinder. Hence, the formulation is reduced to the eigenvalue problem of an equivalent 3 × 3 dynamic matrix, which depends on the cylinder geometry, material, and boundary conditions. Several comparisons with experimental, numerical, and analytical approaches are presented to prove model reliability and practical interest. An excellent balance between fast usability and accuracy is achieved. The user-friendliness of the model makes it suitable to be implemented during the design stage without requiring any deep knowledge of the topic.
Despite the promising potential of the hybrid electric power-split layout, its broader market penetration is prevented by the large number of feasible solutions and the constructive complexity, which overcomplicate the design process. Moreover, due to the lack of relevant literature references, the power-split transmissions design is even more difficult if concerning applications outside the automotive and agricultural sectors. In this paper, a general parametric model already available in the literature to design a single-mode power-split transmission with up to two planetary gear sets and six ordinary gear sets was applied to hybridize an oil drilling rig to recover energy braking during the gravity-driven lowering phases. This is the first power-split electric hybridization of a drilling rig. Two solutions differing in engine power size are presented. Thanks to the modularity of the model, the procedure enabled the optimization of the ICE, the electric machines, and the gear sets through decoupled design phases.