Providing femto access points (FAPs) with computational capabilities will allow (either total or partial) off-loading of highly demanding applications from smartphones to the so-called femto-cloud. Such off-loading promises to be beneficial in terms of battery savings at the mobile terminal (MT) and/or in latency reduction in the execution of applications. However, for this promise to become a reality, the energy and/or the time required for the communication process must be compensated by the energy and/or the time savings that result from the remote computation at the FAPs. For this problem, we provide in this paper a framework for the joint optimization of the radio and computational resource usage exploiting the tradeoff between energy consumption and latency. Multiple antennas are assumed to be available at the MT and the serving FAP. As a result of the optimization, the optimal communication strategy (e.g., transmission power, rate, and precoder) is obtained, as well as the optimal distribution of the computational load between the handset and the serving FAP. This paper also establishes the conditions under which total or no off-loading is optimal, determines which is the minimum affordable latency in the execution of the application, and analyzes, as a particular case, the minimization of the total consumed energy without latency constraints.
19 December 2005 in IEEE Transactions on Signal Processing
This paper considers a wireless communication system with multiple transmit and receive antennas, i.e., a multiple-input-multiple-output (MIMO) channel. The objective is to design the transmitter according to an imperfect channel estimate, where the errors are explicitly taken into account to obtain a robust design under the maximin or worst case philosophy. The robust transmission scheme is composed of an orthogonal space-time block code (OSTBC), whose outputs are transmitted through the eigenmodes of the channel estimate with an appropriate power allocation among them. At the receiver, the signal is detected assuming a perfect channel knowledge. The optimization problem corresponding to the design of the power allocation among the estimated eigenmodes, whose goal is the maximization of the signal-to-noise ratio (SNR), is transformed to a simple convex problem that can be easily solved. Different sources of errors are considered in the channel estimate, such as the Gaussian noise from the estimation process and the errors from the quantization of the channel estimate, among others. For the case of Gaussian noise, the robust power allocation admits a closed-form expression. Finally, the benefits of the proposed design are evaluated and compared with the pure OSTBC and nonrobust approaches.
10 September 2007 in IEEE Journal on Selected Areas in Communications
In this paper, we study the design of the transmitter in the downlink of a multiuser and multiantenna wireless communications system, considering the realistic scenario where only an imperfect estimate of the actual channel is available at both communication ends. Precisely, the actual channel is assumed to be inside an uncertainty region around the channel estimate, which models the imperfections of the channel knowledge that may arise from, e.g., estimation Gaussian errors, quantization effects, or combinations of both sources of errors. In this context, our objective is to design a robust power allocation among the information symbols that are to be sent to the users such that the total transmitted power is minimized, while maintaining the necessary quality of service to obtain reliable communication links between the base station and the users for any possible realization of the actual channel inside the uncertainty region. This robust power allocation is obtained as the solution to a convex optimization problem, which, in general, can be numerically solved in a very efficient way, and even for a particular case of the uncertainty region, a quasi-closed form solution can be found. Finally, the goodness of the robust proposed transmission scheme is presented through numerical results. Robust designs, imperfect CSI, multiantenna systems, broadcast channel, convex optimization.
3 October 2016 in IEEE Transactions on Signal Processing
We present an approach to solve the nonconvex optimization problem that arises when designing the transmit covariance matrices in multiuser multiple-input multiple-output (MIMO) broadcast networks implementing simultaneous wireless information and power transfer (SWIPT). The MIMO SWIPT problem is formulated as a general multiobjective optimization problem, in which data rates and harvested powers are optimized simultaneously. Two different approaches are applied to reformulate the (nonconvex) multiobjective problem. In the first approach, the transmitter can control the specific amount of power to be harvested by power transfer whereas in the second approach the transmitter can only control the proportion of power to be harvested among the different harvesting users. We solve the resulting formulations using the majorization-minimization (MM) approach. The solution obtained from the MM approach is compared to the classical block-diagonalization (BD) strategy, typically used to solve the nonconvex multiuser MIMO network by forcing no interference among users. Simulation results show that the proposed approach improves over the BD approach both the system sum rate and the power harvested by users. Additionally, the computational times needed for convergence of the proposed methods are much lower than the ones required for classical gradient-based approaches.
We consider a system where multiple users are connected to a small cell base station enhanced with computational capabilities. Instead of doing the computation locally at the handset, the users offload the computation of full applications or pieces of code to the small cell base station. In this scenario, this paper provides a strategy to allocate the uplink, downlink, and remote computational resources. The goal is to improve the quality of experience of the users, while achieving energy savings with respect to the case in which the applications run locally at the mobile terminals. More specifically, we focus on minimizing a cost function that depends on the latencies experienced by the users and provide an algorithm to minimize the latency experienced by the worst case user, under a target energy saving constraint per user.
28 October 2010 in IEEE Transactions on Wireless Communications
This paper proposes a differential quantization strategy to be used in the feedback link of a multiple-input multiple-output (MIMO) communication system. This algorithm is applied to the channel Gram matrix using geodesic curves and exploiting the intrinsic geometry of positive definite Hermitian matrices. It also exploits the temporal correlation of the channel, and follows on average the gradient of the cost function associated to the transmitter design criterion. A full description of the algorithm, including the computational cost and a numerical analysis of the effect of delays and errors in the feedback link is presented. Simulation results show that the proposed algorithm improves other techniques based on the direct quantization of the channel response matrix or the quantization of the subspace spanned by the strongest eigenmodes of the MIMO channel, i.e., Grassmannian based techniques. The main drawback of Grassmannian based algorithms is that the transmitter is constrained to apply a uniform power allocation among spatial transmission modes, which is not forced in the algorithm proposed in this paper.