The rapidly increasing demand on power density levels of electric vehicle (EV) drive systems is pushing the boundaries of traction motor performance. Hairpin windings are becoming a popular option for EV motors due to their reduced dc losses and improved heat dissipation capability when compared to traditional random windings. In this article, a comprehensive design approach of hairpin winding layouts is first presented. The flexibility and limitation of end-winding patterns are thoroughly investigated in terms of basic pin connections, special jumpers, transposition, parallel branches, terminal positions, phase shift, winding pitches, as well as slot–pole combinations. To address the challenge of much reduced practical layout options with increased slot number per pole per phase, two novel hairpin winding designs are proposed. A 160-kW, 18 000-r/min permanent magnet (PM) traction motor featuring the new winding layout with 54-slot, 6-pole is developed using a multidomain design platform, which puts special focus on the conductor size optimization. The advantages of the designed motor are clearly revealed by comparison with the more traditional 48-slot, 8-pole counterpart. Finally, a corresponding stator prototype with the proposed hairpin winding is built to validate its manufacturability.
15 October 2019 in IEEE Transactions on Industry Applications
Synchronous reluctance (Syn-Rel) machines with embedded permanent magnets (PMs) are research hotspots in variable speed motor drives due to their robust rotor structure and wide constant power speed range (CPSR). In this paper, the potential of PM-assisted Syn-Rel machine to be next generation heavy duty traction motor solution has been investigated, with special attention put on one key geometric parameter, i.e., airgap length. Careful machine design and optimization has been conducted based on geometric parametrization including airgap length variation, for 15000rpm peak speed and 350kW peak power output. In low speed operations, the influence of airgap length on different torque components has been analyzed in detail based on the frozen permeability method. In field weakening region, the variation trend of several key parameters such as output power, torque ripple, and power losses have been investigated along with airgap length. It is found that with high electric and magnetic loading, reducing the electromagnetic airgap length is not always beneficial. There exists a suitable airgap length value to comprehensively balance torque/power density, cooling capability, efficiency and reliability. Numerical FEA and experimental tests of the prototype are combined to verify the conclusions.
In high performance electric machines, the increase of fundamental frequency leads to additional losses in the winding due to parasitic effects such as the associated skin and proximity effects. In the first part, this paper presents an investigation into accurate modelling of AC losses in the winding using numerical methods and their experimental verification. Then, using experimental motorette setups, this research provides a comparative study between fixed strand positioning and fixed conductor shapes on the AC losses in the winding. It is shown that the exact position of strands in the conductor is not a critical factor; however, it is very important to control the conductor shape inside the slot. In the final section of this paper, an investigation into the relationship between AC losses in the winding and copper filling factor is presented. It is shown experimentally that counter-intuitive design choices such as using a lower copper fill factor and thicker strand diameters may be beneficial in achieving the highest overall efficiency.