Areas at risk of land subsidence in Jakarta can be identified using a land subsidence susceptibility map. This study evaluates the quality of a susceptibility map made using functional (logistic regression and multilayer perceptron) and meta-ensemble (AdaBoost and LogitBoost) machine learning algorithms based on a land subsidence inventory map generated using the Sentinel-1 synthetic aperture radar (SAR) dataset from 2017 to 2020. The land subsidence locations were assessed using the time-series interferometry synthetic aperture radar (InSAR) method based on the Stanford Method for Persistent Scatterers (StaMPS) algorithm. The mean vertical deformation maps from ascending and descending tracks were compared and showed a good correlation between displacement patterns. Persistent scatterer points with mean vertical deformation value were randomly divided into two datasets: 50% for training the susceptibility model and 50% for validating the model in terms of accuracy and reliability. Additionally, 14 land subsidence conditioning factors correlated with subsidence occurrence were used to generate land subsidence susceptibility maps from the four algorithms. The receiver operating characteristic (ROC) curve analysis showed that the AdaBoost algorithm has higher subsidence susceptibility prediction accuracy (81.1%) than the multilayer perceptron (80%), logistic regression (79.4%), and LogitBoost (79.1%) algorithms. The land subsidence susceptibility map can be used to mitigate disasters caused by land subsidence in Jakarta, and our method can be applied to other study areas.
The aims of this research were to map and analyze the risk of land subsidence in the Seoul Metropolitan Area, South Korea using satellite interferometric synthetic aperture radar (InSAR) time-series data, and three ensemble machine-learning models, Bagging, LogitBoost, and Multiclass Classifier. Of the types of infrastructure present in the Seoul Metropolitan Area, subway lines may be vulnerable to land subsidence. In this study, we analyzed Persistent Scatterer InSAR time-series data using the Stanford Method for Persistent Scatterers (StaMPS) algorithm to generate a deformation time-series map. Subsidence occurred at four locations, with a deformation rate that ranged from 6–12 mm/year. Subsidence inventory maps were prepared using deformation time-series data from Sentinel-1. Additionally, 10 potential subsidence-related factors were selected and subjected to Geographic Information System analysis. The relationship between each factor and subsidence occurrence was analyzed by using the frequency ratio. Land subsidence susceptibility maps were generated using Bagging, Multiclass Classifier, and LogitBoost models, and map validation was carried out using the area under the curve (AUC) method. Of the three models, Bagging produced the largest AUC (0.883), with LogitBoost and Multiclass Classifier producing AUCs of 0.871 and 0.856, respectively.
Syifa, M.; Park, S.-J.; Achmad, A.-R.; Lee, C.-W., and Eom, J., 2019. Flood mapping using remote sensing imagery and artificial intelligence techniques: A case study in Brumadinho, Brazil. In: Jung, H.-S.; Lee, S.; Ryu, J.H., and Cui, T. (eds.), Advances in Remote Sensing and Geoscience Information Systems of Coastal Environments. Journal of Coastal Research, Special Issue No. 90, pp. 197-204. Coconut Creek (Florida), ISSN 0749-0208.Floods are considered to be among the most devastating disasters and can threaten human life and environmental ecosystems. On January 25, 2019, the Brumadinho dam wall collapsed and waste material from the Córrego do Feijão mine flooded the area beneath the dam. At least hundreds of people were killed, animal habitats were swamped, and the flood invaded the river and agricultural fields. Brazilian authorities are examining how this destructive flood might threaten the water quality of the contaminated river. It is important to determine the flood distribution to prevent additional contamination by dangerous material from the flood. In this study, remote sensing was effectively used to map and calculate the dimensions of the flood. Pre- and post-flood images from Landsat-8 and Sentinel-2 were employed to devise a pixel-based classification using two artificial intelligence techniques: artificial neural network (ANN) and support vector machine (SVM). The flood area was successfully determined using the two classifiers. The resulting post-flood damage map should be beneficial for mitigating damage from a future flood event.
Hakim, W.L.; Achmad, A.R.; Eom, J., and Lee, C.-W., 2020. Land subsidence measurement in Jakarta coastal area using time series interferometry with Sentinel-1 SAR data. In: Jung, H.-S.; Lee, S.; Ryu, J.-H., and Cui, T. (eds.), Advances in Geospatial Research of Coastal Environments. Journal of Coastal Research, Special Issue No. 102, pp. 75-81. Coconut Creek (Florida), ISSN 0749-0208.Jakarta coastal area is a part of North Jakarta which has a boundary to the Java Sea. Coastal flood from the Java Sea was not a new case in North Jakarta, the situations occurred due to sea-level rise. The conditions of coastal flood in Jakarta can be worsening by land subsidence in Jakarta coastal area. The land subsidence in Jakarta coastal area was occurred in many years and detected by geodetic measurement methods such as GPS and leveling surveys. The study about land subsidence in Jakarta coastal area needed to be updated because it could affect the urban development. This study presents the mean vertical deformation map using Stanford Methods for Persistent Scatterer (StaMPS) for time-series analysis on the Sentinel-1 data archives in the period of March 2017 through April 2020 in both ascending and descending track. The comparison of mean vertical deformation map between two tracks shows a good correlation in terms of displacement patterns with slightly different in 4 individual chosen points that show a high deformation at rates between 30 mm/year and 40 mm/year. The area chosen in this study known as a reclaimed area and the subsidence occurred due to young alluvium consolidation that not supported the maximum compression from a lot of buildings. These approach methods in this study that using StaMPS could be used to monitor land subsidence from all-terrain.
27 December 2021 in IEEE Transactions on Geoscience and Remote Sensing
Despite the development of point-based interferometric synthetic aperture radar (InSAR) time-series methods, such as persistent scatterer interferometry (PSI), it remains difficult to identify reliable measurement points (MPs) in areas under vegetated cover. In this study, we developed a new algorithm, improved combined scatterers interferometry with optimized point scatterers (ICOPS), to monitor changes in surface deformation by combining persistent scatterers (PSs) and distributed scatterers (DSs). The algorithm was subsequently improved through the application of a machine learning process. A generalized likelihood ratio test (GLRT) was applied to identify statistically homogeneous pixels suitable for a small SAR dataset. A machine learning-based optimization process was used to overcome the increase in MPs after the combined scatterers interferometry (CSI) process. The MP optimization process used the support vector regression (SVR) algorithm to find the optimal point from all MPs in the dataset. To improve the reliability of the MP surface deformation mapping after optimization, the optimized hot-spot analysis (OHSA) method was applied to obtain spatially clustered MPs; this was possible despite a low deformation identification rate. To demonstrate the effectiveness of the ICOPS method, we applied this approach to Yellowstone Lake in the USA using 95 SAR images from the Sentinel-1 satellite that was taken during the period of 2017–2020. The CSI method produced an increase in MP density, especially in areas not covered by PSI, which indicated its ability to detect deformations in mountainous areas. Comparisons with GPS data and traditional methods produced promising results with an accuracy of 1 cm/year in terms of the root mean square error (RMSE). The optimization process in CSI also had the advantage of retrieving helpful information in the MP dataset and increased the accuracy of CSI by 12%. Deformation mapping using the optimized results provided new insights regarding the spatial clustering of surface deformation in MPs. This could provide the foundation for developing a posttime-series optimization process based on point scatter as a surface change detection tool.
Nur, A.-S.; Achmad, A.-R., and Lee, C.-W., 2020. Land subsidence measurement in reclaimed coastal land: Noksan using C-Band Sentinel-1 radar interferometry. In: Jung, H.-S.; Lee, S.; Ryu, J.-H., and Cui, T. (eds.), Advances in Geospatial Research of Coastal Environments. Journal of Coastal Research, Special Issue No. 102, pp. 218-223. Coconut Creek (Florida), ISSN 0749-0208.It has been 27 years since the beginning of the Noksan national industrial complex construction at downstream of the Nakdong River in Busan. The complex was built by landfilling a coastal area over one of Korea's deepest soft ground areas. Land subsidence occurred since the start of construction due to primary consolidation and secondary consolidation after the creation finished. Since secondary consolidation directly affects the structure over Noksan, it is crucial to monitor the subsidence rate. This study found that land subsidence happened in four areas of Noksan National Industrial Complex from 2017 to 2020 by applying Stamford Methods for Persistent Scatterer (StaMPS) time-series method using C-band Sentinel-1 SAR datasets from descending and ascending track. The results show land subsidence with a maximum velocity of 20.98 mm/year from descending track datasets and 20.92 mm/year from ascending track datasets. The highest rate area of land subsidence occurred in the south part of Noksan. Mean vertical deformation maps between descending and ascending track have been compared and show a good relationship with 0.93 of coefficient correlation. These approach methods in this study that using StaMPS could be used to monitor slow rate of land subsidence in reclaimed coastal land.