The use of containers in the world is increasing every year in line with international trade flows. In very complex container terminal operations, the risk of work accidents is inevitable and can happen at any time. Therefore, this paper aimed to identify accidents and potential risks occurring in the container terminals. For the case study, the analysis was used the data of accidents during five years in one of the major container terminals in Indonesia. Risk assessment is carried out using the risk matrix method to get the level of risk. The risk that has the highest level is analyzed by using the Fault Tree Analysis method. From the results of the risk assessment shows the container fell to the berth when loading and unloading have the highest risk value. While the results of the Fault Tree Analysis show that traffic accidents are the biggest potential risk, which is 41.8% compared to other accidents. Moreover, human factors especially due to the negligence in operating vehicles or equipment as well as the damage of equipment were the highest common causes of accidents in the container terminal. Based on these results the contribution offered is the risk control options for terminal operators to reduce the possibility of safety failure in the container terminal.

Sustainable development of container terminals is based on energy efficiency and reduction in CO₂ emissions. This study estimated the energy consumption and CO₂ emissions in container terminals according to their layouts. Energy consumption was calculated based on utility data as well as fuel and electricity consumptions for each container-handling equipment in the container terminal. CO₂ emissions were estimated using movement modality based on the number of movements of and distance travelled by each container-handling equipment. A case study involving two types of container terminal layouts i.e. parallel and perpendicular layouts, was conducted. The contributions of each container-handling equipment to the energy consumption and CO₂ emissions were estimated and evaluated using statistical analysis. The results of the case study indicated that on the CO₂ emissions in parallel and perpendicular layouts were relatively similar (within the range of 16–19 kg/TEUs). These results indicate that both parallel and perpendicular layouts are suitable for future ports based on sustainable development. The results can also be used for future planning of operating patterns and layout selection in container terminals.

In recent years, the use of small-scale liquefied natural gas (LNG) has grown alongside demand from industrial users of natural gas. Small-scale LNG is an alternative to the supply of natural gas to remote areas with a cost-effectiveness challenge. To address this challenge, five mobile power plants located in remote areas with limited depth of water level in western Indonesia are used here as a case study. The objective of this paper is to optimize LNG distribution using small-scale LNG carriers and carry out an economic analysis in this region. The capacitated vehicle routing problem model was used to optimize the maritime routing of a small-scale LNG supply chain. The maximization of the volume cargo with a given LNG vessel capacity set as the objective function was therefore provided with the optimum inventory routing and economic analysis of the transport of LNG. Cluster 1 serves three power plants with a total demand of 966 m3/day and a distance is 913 Nautical Miles, while cluster 2 serves two power plants with a total demand of 690 m3/day and distance of 1,483 Nautical Miles. Economic analysis of the two clusters shows that there is a minimum difference in the margin rate needed to make it worth the investment, which is 3 USD/MMBTU for cluster 1 and 4 USD/MMBTU for cluster 2. Thus, this paper concludes that the cost of LNG transportation depends on the amount of cargo demand and shipping distances.