ARTHUR de MEDEIROS

Dr. ARTHUR de MEDEIROS

Federal University of Rio Grande do Norte - UFRN
orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
Verified
Journal Article
Open access
PDF file
JBJahamunna A. A. Barbosa
Jahamunna A. A. Barbosa
AZAriana Zoppi
Ariana Zoppi
MQMario Alfredo Quevedo
Mario Alfredo Quevedo
PMPolyanne N. De Melo
Polyanne N. De Melo
ARTHUR de MEDEIROSARTHUR de MEDEIROS
ARTHUR de MEDEIROS
Arnobio Antonio Da Silva-JuniorArnobio Antonio Da Silva-Junior
Arnobio Antonio Da Silva-Junior
The interaction of methotrexate (MTX) with beta-cyclodextrin (β-CD) in the presence of triethanolamine (TEA) was investigated with the aim to elucidate the mechanism whereby self-assembly cyclodextrin systems work in association with this third component. Solubility diagram studies showed synergic increment of the MTX solubility to be about thirty-fold. Experiments using 2D ROESY and molecular modeling studies revealed the inclusion of aromatic ring III of the drug into β-CD cavity, in which TEA contributes by intensifying MTX interaction with β-CD and stabilizes MTX:β-CD:TEA ternary complex by electrostatic interaction. The maintenance of these interactions in solid phase was also studied in ternary MTX:β-CD:TEA and comparisons were made with freeze dried binary MTX:β-CD and physical mixtures. FTIR studies evidenced that MTX–β-CD interaction remained in solid ternary complexes, which was also supported by thermal (differential scanning calorimetry (DSC), thermogravimetric analysis (TG)/first derivative of TG analysis (DTG) and C,N,H elementary analysis) and structural (X-ray diffraction analysis, (XRD)) studies, mainly regarding the increment of drug stability. The efficient in vitro drug dissolution studies successfully demonstrated the contribution of ternary complexes, which highlights the importance of this possible new raw material for further applications in drug delivery systems.

29 June 2017 in Polymers
Verified
Journal Article
Open access
PDF file
ENEdnaldo G. Do Nascimento
Ednaldo G. Do Nascimento
LCLilia B. De Caland
Lilia B. De Caland
ARTHUR de MEDEIROSARTHUR de MEDEIROS
ARTHUR de MEDEIROS
MPMatheus Pedrosa
Matheus Pedrosa
JSJosé Lamartine Soares Sobrinho
José Lamartine Soares Sobrinho
Arnobio Antonio Da Silva-JuniorArnobio Antonio Da Silva-Junior
Arnobio Antonio Da Silva-Junior
Chitosan is a natural copolymer generally available in pharmaceutical and food powders associated with drugs, vitamins, and nutraceuticals. This study focused on monitoring the effect of the morphology and structural features of the chitosan particles for controlling the release profile of the active pharmaceutical ingredient (API) propranolol hydrochloride. Chitosan with distinct molecular mass (low and medium) were used in the formulations as crystalline and irregular particles from commercial raw material, or as spherical, uniform, and amorphous spray-dried particles. The API–copolymer interactions were assessed when adding the drug before (drug-loaded particles) or after the spray drying (only mixed with blank particles). The formulations were further compared with physical mixtures of the API with chitin and microcrystalline cellulose. The scanning electron microscopy (SEM) images, surface area, particle size measurements, X-ray diffraction (XRD) analysis and drug loading have supported the drug release behavior. The statistical analysis of experimental data demonstrated that it was possible to control the drug release behavior (immediate or slow drug release) from chitosan powders using different types of particles.

1 October 2016 in Carbohydrate Polymers
Verified
Journal Article
Closed access
ARTHUR de MEDEIROSARTHUR de MEDEIROS
ARTHUR de MEDEIROS
AZAriana Zoppi
Ariana Zoppi
EBEUZEBIO GUIMARAES BARBOSA
EUZEBIO GUIMARAES BARBOSA
JOJonas Ivan Nobre Oliveira
Jonas Ivan Nobre Oliveira
MPMatheus Pedrosa
Matheus Pedrosa
Arnobio Antonio Da Silva-JuniorArnobio Antonio Da Silva-Junior
Arnobio Antonio Da Silva-Junior

1 January 2020 in Brazilian Oral Research
Verified
Journal Article
Open access
PDF file
DMDayanne Monielle Duarte Moura
Dayanne Monielle Duarte Moura
ARTHUR de MEDEIROSARTHUR de MEDEIROS
ARTHUR de MEDEIROS
KSKarina Barbosa de Souza
Karina Barbosa de Souza
AVAretha Heitor Veríssimo
Aretha Heitor Veríssimo
João Paulo Mendes TribstJoão Paulo Mendes Tribst
João Paulo Mendes Tribst
RSRodrigo Othávio de Assunção e Souza
Rodrigo Othávio de Assunção e Souza
The objective of this study was to evaluate the influence of hydrofluoric acid (HF) concentration, etching time, and application of phosphoric acid (PA) followed by neutralization with sodium bicarbonate on the bond strength between a feldspar ceramic and resin cement. Thus, 80 blocks (10 x 12 x 2 mm) of glass ceramic (VM - Vita Mark II - Vita Zahnfabrik) were made and randomly assigned to eight groups (n =10) according to the factors: HF concentration (5 and 10%), etching time (60 and 120 s), and use of phosphoric acid (PA) (with and without). According to the experimental group, 37% PA (Condac, FGM) was applied after HF etching for 60s. Afterwards, samples were immersed in sodium bicarbonate for 1 min then in an ultrasonic bath in distilled water (5 min) for cleaning. After surface bonding treatment, cylinders (empty set = 2 mm; h = 2 mm) of dual resin cement (AllCem / FGM) were made in the center of each block. The samples were then stored in water (37 degrees C) for 90 days and submitted to the shear bond test (50 KgF, 1 mm/min). Failure analysis was performed by stereomicroscope and scanning electron microscopy. Data (MPa) were analyzed with 3-way ANOVA and Tukey's test. Only the factor "HF concentration" was significant (p = 0.02). Most failures were of cohesive in ceramic (40%) and mixed types (42.5%). The 10% HF resulted in higher shear bond strength value than the 5% HF. Surface cleaning with phosphoric acid followed by sodium bicarbonate and HF time (60 or 120 seconds) did not influence the resin bond strength to feldspar ceramic.

29 September 2020 in Pharmaceutics
Verified
Journal Article
Open access
PDF file
ARTHUR de MEDEIROSARTHUR de MEDEIROS
ARTHUR de MEDEIROS
MTManoela Torres-Rêgo
Manoela Torres-Rêgo
ALAriane Lacerda
Ariane Lacerda
Hugo Alexandre Oliveira RochaHugo Alexandre Oliveira Rocha
Hugo Alexandre Oliveira Rocha
EEEryvaldo Socrates Egito
Eryvaldo Socrates Egito
Arnobio Antonio Da Silva-JuniorArnobio Antonio Da Silva-Junior
Arnobio Antonio Da Silva-Junior
This study assesses the efficacy of different nanoemulsion formulations as new and innovative adjuvants for improving the in vivo immunization against the Tityus serrulatus scorpion venom. Nanoemulsions were designed testing key-variables such as surfactants, co-solvents, and the influence of the temperature, which would be able to induce the phase transition from a liquid crystal to a stable nanoemulsion, assessed for four months. Additionally, cationic-covered nanoemulsion with hyper-branched poly(ethyleneimine) was prepared and its performance was compared to the non-cationic ones. The physicochemical properties of the selected nanoemulsions and the interactions among their involved formulation compounds were carefully monitored. The cytotoxicity studies in murine macrophages (RAW 264.7) and red blood cells were used to compare different formulations. Moreover, the performance of the nanoemulsion systems as biocompatible adjuvants was evaluated using mice immunization protocol. The FTIR shifts and the zeta potential changes (from −18.3 ± 1.0 to + 8.4 ± 1.4) corroborated with the expected supramolecular anchoring of venom proteins on the surface of the nanoemulsion droplets. Cell culture assays demonstrated the non-toxicity of the formulations at concentrations less than 1.0 mg/mL, which were able to inhibit the hemolytic effect of the scorpion venom. The cationic-covered nanoemulsion has shown superior adjuvant activity, revealing the highest IgG titer in the immunized animals compared to both the non-cationic counterpart and the traditional aluminum adjuvant. In this approach, we demonstrate the incredible potential application of nanoemulsions as adjuvants, using a nanotechnology platform for antigen delivery system on immune cells. Additionally, the functionalization with hyper-branched poly(ethyleneimine) enhances this recognition and improves its action in immunization.

1 February 2020 in Journal of Analytical Chemistry
Verified
Journal Article
Closed access
PDF file
GFGabriela Diniz Fonsêca
Gabriela Diniz Fonsêca
ARTHUR de MEDEIROSARTHUR de MEDEIROS
ARTHUR de MEDEIROS
ENEdnaldo Gomes Do Nascimento
Ednaldo Gomes Do Nascimento
LALucas Amaral-Machado
Lucas Amaral-Machado
WOWogenes Nunes Oliveira
Wogenes Nunes Oliveira
KSKátia Solange Cardoso Rodrigues dos Santos
Kátia Solange Cardoso Rodrigues dos Santos
The use of chitosan as a diluent in propranolol capsules was evaluated, where its performance was compared with that of microcrystalline cellulose. A spectrophotometric method was validated to quantify propranolol in these capsules, where weight variation, drug content and dissolution were evaluated. The quantification of propranolol was carried out at 290 nm in the range of 32–48 mg/L. The specificity, linearity, limits of detection and quantification, precision, accuracy and robustness of this method were in accordance with regulatory parameters. Propranolol capsules prepared using both diluents exhibited weight variations and drug contents within acceptable limits. The dissolution studies showed that the use of chitosan as a diluent is a promising alternative to capsules for modulation of water soluble drugs release, such as propranolol. The present study reveals an alternative approach of higher functionality of chitosan as a diluent in solid dosage forms when compared to a traditional diluent – microcrystalline cellulose.