Fault barriers are key structures for studying seismic hazard in regions of intense brittle deformation. The interaction between fault sets affects their seismogenic behavior, if some of them act as barriers. The Granada Basin, in the Betic Cordillera, is a region affected by shallow brittle deformation, as it was the scenario for the recent Granada 2021 seismic sequence. This seismicity presented a swarm behavior at the beginning of the sequence, followed by mainshock‐aftershock features. Geological and gravity data presented here reveal that the basement is affected by two sets of NW‐SE and NE‐SW normal faults and intensely deformed by vertical NW‐SE joints. Improved relocation of the Granada 2021 seismicity reveals a confined chimney‐shape seismicity caused by the activity of a 2 km long NW‐SE normal fault segment. The confinement of the sequence is associated with the NE‐SW fault set acting as a barrier that restricts the rupture area, limiting the maximum magnitude, and favoring the recurrence of events with smaller magnitude. The chimney‐shape of the seismic sequence suggests that the deformation is propagated vertically to the surface, facilitated by preexisting fractures. The shallow extensional deformation during the uplift of the central Betic Cordillera drove the activity of the local structures obliquely to the regional extensional trends, as evidenced by the seismic sequence. This multidisciplinary study improves the knowledge on the origin of the Granada Basin and underlies the important role of preexisting fractures on fault segmentation and seismic propagation, decreasing the seismic potential of this area.
Offshore geological hazards can occur in any marine domain or environment and represent a serious threat to society, the economy, and the environment. Seismicity, slope sedimentary instabilities, submarine volcanism, fluid flow processes, and bottom currents are considered here because they are the most common hazardous processes; tsunamis are also examined because they are a secondary hazard generated mostly by earthquakes, slope instabilities, or volcanic eruptions. The hazards can co-occur and interact, inducing a cascading sequence of events, especially in certain contexts, such as tectonic indentations, volcanic islands, and canyon heads close to the coast. We analyze the key characteristics and main shortcomings of offshore geological hazards to identify their present and future directions for marine geoscience investigations of their identification and characterization. This review establishes that future research will rely on studies including a high level of multidisciplinarity. This approach, which also involves scientific and technological challenges, will require effective integration and interplay between multiscale analysis, mapping, direct deep-sea observations and testing, modelling, and linking offshore observations with onshore observations.
Understanding active tectonics and seismicity in extensional settings requires the analysis of high‐angle normal faults (HANFs) and the transfer of deformation at depth. The debate surrounds the role of low‐angle normal faults (LANFs) in triggering high magnitude earthquakes. The central Betic Cordillera is an active seismic zone affected by the NNW‐SSE Eurasia‐Nubia convergence and orthogonal extension. The seismicity and present‐day stress determined by earthquake focal mechanisms reveals the activity of a NE‐SW extensional system in the shallowest 12 km of the Granada Basin. The structure of the sedimentary infill, as derived by geological field and gravimetric techniques, suggests the formation of a half‐graben tilted to the N‐NE. Seismologic data suggest the activity of HANFs above 6–7 km depth and a LANF zone around 6–12 km depth, with related earthquakes of up to Mw 4.0 and 20° to 30° fault dips. High‐precision leveling lines highlight the importance of the Granada Fault in the system, with average vertical displacement rates of 0.35–1.1 mm/yr. These data suggest creep fault behavior at the surface and increased seismicity at depth. The upper crustal extension in the collisional Betic Cordillera is accommodated by a top‐to‐the‐WSW extensional detachment related to westward motion and rollback in the Gibraltar Arc and the gravitational collapse of the cordillera, in a framework of NNW‐SSE shortening. This comprehensive study draws a new scenario that advances understanding of relationships between HANFs and LANFs.
The Gibraltar Arc includes the Betic and Rif Cordilleras surrounding the Alboran Sea; it is formed at the northwest–southeast Eurasia–Nubia convergent plate boundary in the westernmost Mediterranean. Since 2006, the Campo de Dalias GNSS network has monitored active tectonic deformation of the most seismically active area on the north coast of the Alboran Sea. Our results show that the residual deformation rates with respect to Eurasia range from 1.7 to 3.0 mm/year; roughly homogenous west-southwestward displacements of the northern sites occur, while the southern sites evidence irregular displacements towards the west and northwest. This deformation pattern supports simultaneous east-northeast–west-southwest extension, accommodated by normal and oblique faults, and north-northwest–south-southeast shortening that develops east-northeast–west-southwest folds. Moreover, the GNSS results point to dextral creep of the main northwest–southeast Balanegra Fault. These GNNS results thus reveal, for the first time, present-day interaction of the roll-back tectonics of the Rif–Gibraltar–Betic slab in the western part of the Gibraltar Arc with the indentation tectonics affecting the eastern and southern areas, providing new insights for improving tectonic models of arcuate orogens.
The Himalaya–Tibet region represents a complex region of active deformation related to the ongoing India–Eurasia convergence process. To provide additional constraints on the active processes shaping this region, we used a comprehensive dataset of GNSS and focal mechanisms data and derived crustal strain and stress fields. The results allow the detection of features such as the arc-parallel extension along the Himalayan Arc and the coexistence of strike-slip and normal faulting across Tibet. We discuss our findings concerning the relevant geodynamic models proposed in the literature. While earlier studies largely emphasized the role of either compressional or extensional processes, our findings suggest a more complex interaction between them. In general, our study highlights the critical role of both surface and deep processes in shaping the geodynamic processes. The alignment between tectonic stress and strain rate patterns indicates that the crust is highly elastic and influenced by present-day tectonics. Stress and strain orientations show a clockwise rotation at 31°N, reflecting deep control by the underthrusted Indian Plate. South of this boundary, compression is driven by basal drag from the underthrusting Indian Plate, while northward, escape tectonics dominate, resulting in eastward movement of the Tibetan Plateau. Localized stretching along the Himalaya is likely driven by the oblique convergence resulting from the India–Eurasia collision generating a transtensional regime over the Main Himalayan Thrust. In Tibet, stress variations appear mainly related to changes in the vertical axis, driven by topographically induced stresses linked to the uniform elevation of the plateau. From a broader perspective, these findings improve the understanding of driving crustal forces in the Himalaya–Tibet region and provide insights into how large-scale geodynamics drives surface deformation. Additionally, they contribute to the ongoing debate regarding the applicability of the stress–strain comparison and offer a more comprehensive framework for future research in similar tectonic settings worldwide.
The coexistence of shortening and extensional tectonic regimes is a common feature in orogenic belts. The westernmost end of the Western Mediterranean is an area undergoing shortening related to the 5 mm/yr NNW‒SSE convergence of the Nubia and Eurasia Plates. In this region, the Central Betic Cordillera shows a regional ENE‒WSW extension. Here, we present GNSS‐derived geodetic data along a 170 km‐long transect orthogonal to the main active normal faults of the Central Betic Cordillera. Our data indicate that the total extension rate along the Central Betic Cordillera is 2.0 ± 0.3 mm/yr. Extension is accommodated in the eastern (0.8 ± 0.3 mm/yr in the Guadix‐Baza Basin) and western (1.3 ± 0.3 mm/yr in the Granada Basin) parts of the Central Betic Cordillera, while no extension is recorded in the central part of the study area. Moreover, our data permit us to quantify, for the first time, short‐term fault slip rates of the Granada Fault System, which is one of the main seismogenic sources of the Iberian Peninsula. We deduce a fault slip rate of ∼1.3 ± 0.3 mm/yr for the whole Granada Basin, with 0.9 ± 0.3 mm/yr being accommodated in the Granada Fault System and 0.4 ± 0.3 mm/yr being accommodated in the southwestern sector of the Granada Basin, where no active faults have been previously described at the surface. The heterogeneous extension in the Central Betic Cordillera could be accommodated by shallow high‐angle normal faults that merge with a detachment at depth. Part of the active extension could be derived from gravitational instability because of underlying over‐thickened crust.