Due to the versatility of its features and capabilities, chitosan generated from marine crustacean waste is gaining importance and appeal in a wide variety of applications. It was initially used in pharmaceutical and medical applications due to its antibacterial, biocompatible, and biodegradable properties. However, as the demand for innovative materials with environmentally benign properties has increased, the application range of chitosan has expanded, and it is now used in a variety of everyday applications. The most exciting aspect of the chitosan is its bactericidal properties against pathogens, which are prevalent in contaminated water and cause a variety of human ailments. Apart from antimicrobial and water filtration applications, chitosan is used in dentistry, in water filtration membranes to remove metal ions and some heavy metals from industrial effluents, in microbial fuel cell membranes, and in agriculture to maintain moisture in fruits and leaves. It is also used in skin care products and cosmetics as a moisturizer, in conjunction with fertilizer to boost plant immunity, and as a bi-adhesive for bonding woods and metals. As it has the capacity to increase the life span of food items and raw meat, it is an unavoidable component in food packing and preservation. The numerous applications of chitosan are reviewed in this brief study, as well as the approaches used to incorporate chitosan alongside traditional materials and its effect on the outputs.
Polymer composites with different reinforcements have many applications. By adjusting process settings and adding fibers and fillers, composite properties can be improved. Additive manufacturing is popular in the polymer industry because it can manufacture intricately designed parts with fewer defects and greater strength with less material consumption. Composites use thermoplastics and thermosetting polymers. Thermoset plastics cannot be reused or recycled; therefore, they are disposed in landfills, creating pollution and environmental harm. In this work, thermoplastic ASA (Acrylonitrile Styrene Acrylate) polymer filament is used for FDM 3D printing. The specimens are made by varying five process parameters that affected the materials’ mechanical properties. The tensile, flexural and impact specimens are made using MINITAB software and ASTM requirements. The L18 orthogonal array experimental design, specimens and results were optimized. Infill density and layer height were most influential. Maximum tensile strength of 51.86 MPa, flexural strength of 82.56 MPa and impact strength of 0.180 J/mm2 were obtained by following the software-suggested input factors and compared with the predicted values. Final error percentage was obtained between the predicted and the experimental results and it was found to be under 3%, which is acceptable.
1 September 2012 in Engineering Applications of Artificial Intelligence
Increasing demand for simplification of frequently used products promotes innovation with simple mechanisms. In this study, an attempt is made by amalgamating FMEA, QFD, TRIZ, LCA, and fuzzy TOPSIS for the development of sustainable products. The methodology is executed to redesign a simple pressure relief valve (PRV) in an economic, sustainable, and innovative manner. The failure modes of PRV are considered in FMEA and ranked by their RPN. The environmental voice of the customer is imbibed in ECQFD to correlate with the engineering specifications and obtain the critical zones of improvement. Possible innovations of the existing design based on the design option selected from ECQFD are considered by analyzing the design feature contradictions, and solutions are addressed using the TRIZ matrix. Four CAD models of improved designs were created and subjected to sustainability analysis and fatigue life analysis. The redesigns were evaluated using fuzzy TOPSIS, an MCDM approach, to obtain an unbiased ranking based on multiple criteria supported by the result analysis and expert opinions. The final design was selected for prototyping. This approach provides a holistic approach for innovative product design and development and a simplified approach for an innovative redesign of an existing product.
A promising approach for an effective shop scheduling that synergizes the benefits of the combinatorial optimization, supervised learning and discrete-event simulation is presented. Though dispatching rules are in widely used by shop scheduling practitioners, only ordinary performance rules are known; hence, dynamic generation of dispatching rules is desired to make them more effective in changing shop conditions. Meta-heuristics are able to perform quite well and carry more knowledge of the problem domain, however at the cost of prohibitive computational effort in real-time. The primary purpose of this research lies in an offline extraction of this domain knowledge using decision trees to generate simple if-then rules that subsequently act as dispatching rules for scheduling in an online manner. We used similarity index to identify parametric and structural similarity in problem instances in order to implicitly support the learning algorithm for effective rule generation and quality index for relative ranking of the dispatching decisions. Maximum lateness is used as the scheduling objective in a job shop scheduling environment.
Through reduction of thickness value in nanostructures, the features of surface elasticity become more prominent due to having a high surface-to-volume ratio. The main aim of this research work was to examine the surface residual stress effect on the three-dimensional nonlinear stability characteristics of geometrically perfect and imperfect cylindrical shells at nanoscale under axial compression. To do so, an unconventional three-dimensional shell model was established via combination of the three-dimensional shell formulations and the Gurtin–Murdoch theory of elasticity. The silicon material is selected as a case study, which is the most utilized material in the design of micro-electromechanically systems. Then, the moving Kriging meshfree approach was applied to take numerically into account the surface free energy effects and the initial geometrical imperfection in the three-dimensional nonlinear stability curves. Accordingly, the considered cylindrical shell domain was discretized via a set of nodes together using the quadratic polynomial type of basis shape functions and an appropriate correlation function. It was found that the surface stress effects lead to an increase the critical axial buckling load of a perfect silicon nanoshell about 82.4 % 82.4 \% for the shell thickness of 2 nm 2{\rm{nm}} , about 32.4 % 32.4 \% for the shell thickness of 5 nm 5{\rm{nm}} , about 15.8 % 15.8 \% for the shell thickness of 10 nm 10{\rm{nm}} , and about 7.5 % 7.5 \% for the shell thickness of 20 nm 20{\rm{nm}} . These enhancements in the value of the critical axial buckling load for a geometrically imperfect silicon nanoshell become about 92.9 % 92.9 \% for the shell thickness of 2 nm 2{\rm{nm}} , about 36.5 % 36.5 \% for the shell thickness of 5 nm 5{\rm{nm}} , about 17.7 % 17.7 \% for the shell thickness of 10 nm 10{\rm{nm}} , and about 8.8 % 8.8 \% for the shell thickness of 20 nm 20{\rm{nm}} .