The present study provides a solvent-free organic synthesis of quaternary ammonium salts: bis(2-hydroxyethyl)dimethylammonium taurate ([BHEDMA][Tau]) and bis(2-hydroxyethyl)dimethylammonium acetate ([BHEDMA][OAc]). These ionic compounds are promising materials for carbon dioxide capture processes, as mono sorbents, supplemental components in the conventional process of chemical absorption, and in the combined membrane approach for improving sorption efficiency. The synthesized compounds were characterized by ¹H NMR and FT-IR spectroscopies and elemental analysis. Afterward, the sorption properties of the compounds were evaluated using the inverse gas chromatography (IGC) method, and their thermodynamic parameters were calculated in the temperature range of 303.15–333.15 K. The enthalpy change (∆_sH) was less than 80 kJ·mol⁻¹, indicated by the physical nature of sorption and also proved by FT-IR. Henry’s law constant in regard to carbon dioxide at 303.15 K was equal to 4.76 MPa for [BHEDMA][Tau], being almost 2.5 lower than for [BHEDMA][OAc] (11.55 MPa). The calculated carbon dioxide sorption capacity for [BHEDMA][Tau] and [BHEDMA][OAc] amounted to 0.58 and 0.30 mmol·g⁻¹, respectively. The obtained parameters are comparable with the known solid sorbents and ionic liquids used for CO₂ capture. However, the synthesized compounds, combining the advantages of both alkanolamines and ionic liquids, contain no fluorine in their structure and thus match the principles of environmental care.

The present study continues the development and enhancement of a highly efficient unique hybrid technique—membrane-assisted gas absorption in designing the separation unit, which provides the improvement in mass-transfer of a target component during the ammonia capture process from a process loop of the Haber–Bosch technological route. In order to minimize the absorbent volume to membrane area ratio, the special separation cell was designed based on a combination of two types of hollow fiber membranes, dense gas separation membrane and porous pervaporation membrane. The separation performance tests were implemented under two sets of conditions, sweeping the bore (permeate) side of a cell with helium and hydrogen-nitrogen mix. For both cases, the membrane-assisted gas absorption cell demonstrated high separation efficiency, and the ammonia concentration in the permeate was never lower than 81 mol%; meanwhile, under the hydrogen-nitrogen bore sweep conditions, the ammonia concentration in the permeate reached 97.5 mol% in a single-step process. Nevertheless, there is a product purity–recovery rate trade-off, which is a typical issue for separation processes.

The present paper deals with the complex study of CO₂ capture from combined heat power plant flue gases using the efficient technological design of a membrane cascade type of «Continuous Membrane Column» for binary gas mixture separation. In contrast to well-known multi-step or multi-stage process designs, the cascade type of separation unit provides several advantages. Here, the separation process is implemented in it by creating two counter current flows. In one of them is depleted by the high-permeable component in a continuous mode, meanwhile the other one is enriched. Taking into account that the circulating flows rate overcomes the withdrawn one, there is a multiplicative increase in separation efficiency. A comprehensive study of CO₂ capture using the membrane cascade type of «Continuous Membrane Column» includes the determination of the optimal membrane material characteristics, the sensitivity study of the process, and a feasibility evaluation. It was clearly demonstrated that the proposed process achieves efficient CO₂ capture, which meets the modern requirements in terms of the CO₂ content (≥95 mol.%), recovery rate (≥90%), and residual CO₂ concentration (≤2 mol.%). Moreover, it was observed that it is possible to process CO₂ with a purity of up to 99.8 mol.% at the same recovery rate. This enables the use of this specific process design in CO₂ pretreatment operations for the production of high-purity carbon dioxide.