Kirill Vyatkin

Mr. Kirill Vyatkin

Perm National Research Polytechnic University
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2022 in International Journal of Engineering
Verified
Journal Article
Closed access
PDF file
PIP. Y. Ilyushin
P. Y. Ilyushin
KVKirill Vyatkin
Kirill Vyatkin
AKA. V. Kozlov
A. V. Kozlov
During the oil production, the occurrence of such a complication as the formation of wax deposits is not uncommon. The fight against these deposits, as well as the development of modern methods of dealing with them, is one of the most important tasks of the subsoil user. Many modern methods of modeling deposits require the exact determination of such a quantity as the thermal conductivity of organic deposits. Based on the analysis of scientific literature, it can be concluded that there is no method developed for estimating this value under conditions of wax formation without affecting their pore structure. The paper describes a method for determining this value based on the results of a study of the process of formation of organic deposits on the laboratory installation "Wax Flow Loop" based on the laws of heat and mass transfer. Based on the results of applying this technique, it becomes possible to determine the thermal conductivity of organic deposits, the value of which correlates with the values given in the reference and scientific literature. In addition, the presence of a correlation between the value of the thermal conductivity of deposits and the component composition of the studied fluid was determined. The application of the described technique will make it possible to most accurately simulate the processes of oil production and determine the technological effectiveness of the use of modern methods of combating organic deposits.

14 July 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
IPIvan Putilov
Ivan Putilov
SKSergey Krivoshchekov
Sergey Krivoshchekov
KVKirill Vyatkin
Kirill Vyatkin
AKAleksandr Kochnev
Aleksandr Kochnev
KRKirill Ravelev
Kirill Ravelev
The article describes the original technique of predicting the effectiveness of hydrochloric acid treatment of the bottom hole zone of a carbonate reservoir. The technique consists in determining the technological effectiveness of the oil recovery stimulation procedure at productive wells using hydrodynamic simulation based on the calculated value of skin factor change. In the course of the study, a number of parameters affecting the intensity of flow coefficient decline in the near-wellbore zone during acid treatment have been established. The paper presents a comparison of data on the actual change of the skin factor after acidizing jobs at the fields of Perm Krai (Russian Federation) and the calculated values obtained using the presented technique. This scientific research includes an example of practical application of the proposed technique for the target well of the Kokuyskoye oil field in Perm Krai, its results with a minor deviation coinciding with the actual values of the flow rate. In the conclusion to the study, it is noted that using the proposed technique, recommendations can be provided on the selection of acid composition and technology of its injection into formation for the preliminary evaluation of the cost effectiveness of the designed procedure.

15 June 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
PIPavel Ilushin
Pavel Ilushin
KVKirill Vyatkin
Kirill Vyatkin
AKAnton Kozlov
Anton Kozlov
Wax deposits related to flow assurance are a costly problem in oil production in many fields around the world. Modeling of this process is the main tool for creating and optimizing methods to deal with this problem. This paper considers a new empirical model for the formation of these deposits, based on the results of an array of laboratory studies, theoretical data and technological calculations are presented. The created technique takes into account the conditions of oil flow, data from laboratory studies, and the water cut of the product. The experience of the industrial operation of the technique showed a high convergence of the calculated and actual deposit profiles. Based on a comparison of the calculated and actual deposit profiles, it was concluded that the standard deviation of maximum wax thickness is 6.0%, and the depth with the greatest wax thickness is 3.5%, which is a fairly high result. The use of this technique makes it possible to optimize the depth of mechanical cleaning of the well, the installation of heating cables, as well as the parameters of hot flushing, which increases their efficiency and reduces the cost of combating the formation of wax deposition.

21 December 2021 in Inventions
Verified
Journal Article
Open access
PDF file
PIPavel Ilushin
Pavel Ilushin
KVKirill Vyatkin
Kirill Vyatkin
AKAnton Kozlov
Anton Kozlov
The formation of wax deposits is a common phenomenon in the production and transportation of formation fluids. On the territory of the Perm Krai, this problem occurs in half of the mining funds. One of the most common and promising methods of dealing with these deposits is the use of inhibitor regents. The most popular technique for assessing the effectiveness of a wax inhibitor is the «Cold Finger», which has a number of significant drawbacks. This work presents a number of methods for assessing the effectiveness of inhibition of paraffin formation on the laboratory installation «WaxFlowLoop». A number of laboratory studies have been carried out to determine the effectiveness of a paraffin deposition inhibitor for inhibiting the paraffin formation process of four target fluids. Verification of the obtained values was carried out by comparing them with the field data. As a result of laboratory studies, it was found that the value of the inhibitor efficiency, determined by the «Cold Finger» method, differs from the field data by an average of 2 times. At the same time, the average deviation of the results determined at the «WaxFlowLoop» installation from the field data is 8.1%. The correct selection of a paraffin deposition inhibitor and its dosage can significantly increase the inter-treatment period of the well, thereby reducing its maintenance costs and increasing the efficiency of well operation.

21 July 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
KVKirill Vyatkin
Kirill Vyatkin
VMVictor Mordvinov
Victor Mordvinov
PIPavel Ilushin
Pavel Ilushin
AKAnton Kozlov
Anton Kozlov
The problem of the formation of organic deposits on the inside surfaces of borehole equipment and oilfield pipelines, which is urgent for all active oil fields, was considered in the study. The formation of these deposits leads to decreased lifespans for oilfield equipment and accidents involving oil pipelines and wells. The aim of our work was to estimate the dependencies of the organic deposition’s formation-rate factor on the water cut of the investigated water–oil emulsion and the mineralization of the water phase. Examination via generation of asphaltene–resin–paraffin deposits on the surfaces of cold rods was carried out with a “Cold Finger” CF-4 unit. Coefficients of specific oil sludging, fluid sludging and rate sludging have been determined. It has been defined that in the definite oilfields, the rate of sludging does not increase as the water content in the emulsion increases. As water-phase mineralization increases, this value remains practically constant.

10 December 2021 in Fluids
Verified
Journal Article
Open access
PDF file
PIPavel Ilushin
Pavel Ilushin
KVKirill Vyatkin
Kirill Vyatkin
AMAlexander Menshikov
Alexander Menshikov
One of the main problems in the oil industry is the fallout of asphaltene–resin–paraffin deposits (ARPDs) during oil production and transportation. The formation of organic deposits leads to reduced equipment life and reduced production. Currently, there is no single methodology for the numerical simulation of the ARPD dropout process. The aim of our work was to obtain a correlation dependence characterizing the rate of wax growth over time for oils in the Perm Krai, depending on temperature, pressure, and speed conditions. Experimental data for 20 oil samples were obtained using a Wax Flow Loop installation that simulates fluid movement in tubing. The developed correlation was tested in 154 wells. The results of numerical modeling of the paraffin precipitation process made it possible to correct the inter-treatment period of scraping for 109 wells (71%), indicating the high accuracy of the developed approach.