We report that through the incorporation of polar self-assembled monolayers (SAMs) at the indium tin oxide (ITO)/donor interface in chloroaluminium phthalocyanine (ClAlPc)/C60 discrete heterojunction organic photovoltaic (OPV) cells, the power conversion efficiency can be dramatically increased. This enhanced performance is due to better alignment between the hole-extracting electrode Fermi level and the highest occupied molecular orbital (HOMO) of the ClAlPc donor, as well as an improved surface compatibility which provides a more optimised electrode/donor interface. Optimised cells demonstrate an increase of ∼85% in open circuit voltage which results in a near three-fold increase in power conversion efficiency from 1.3% to 3.3% under 1 sun illumination. Comparative studies are made using cells based on two other organic donor materials, copper phthalocyanine (CuPc) and boron subphthalocyanine (SubPc).
27 November 2012 in The Journal of Physical Chemistry C
We report a method of fabricating a high work function, solution processable vanadium oxide (V2Ox(sol)) hole-extracting layer. The atmospheric processing conditions of film preparation have a critical influence on the electronic structure and stoichiometry of the V2Ox(sol), with a direct impact on organic photovoltaic (OPV) cell performance. Combined Kelvin probe (KP) and ultraviolet photoemission spectroscopy (UPS) measurements reveal a high work function, n-type character for the thin films, analogous to previously reported thermally evaporated transition metal oxides. Additional states within the band gap of V2Ox(sol) are observed in the UPS spectra and are demonstrated using X-ray photoelectron spectroscopy (XPS) to be due to the substoichiometric nature of V2Ox(sol). The optimized V2Ox(sol) layer performance is compared directly to bare indium–tin oxide (ITO), poly(ethyleneoxythiophene):poly(styrenesulfonate) (PEDOT:PSS), and thermally evaporated molybdenum oxide (MoOx) interfaces in both small molecule/fullerene and polymer/fullerene structures. OPV cells incorporating V2Ox(sol) are reported to achieve favorable initial cell performance and cell stability attributes.
We report a ∼60% increase in open circuit voltage (Voc) and power conversion efficiency in a chloroaluminium phthalocyanine (ClAlPc)/fullerene (C60) planar heterojunction photovoltaic device after insertion of a MoO3 hole-extracting layer at the interface between the indium tin oxide (ITO) electrode and the ClAlPc donor layer, with an associated improvement in device stability. A similar improvement was observed in heterojunction devices based on mixed ClAlPc/C60 layers. We propose that the improvements in device performance are due to the pinning of the ITO Fermi level to the valance band of the MoO3 interlayer, where the latter is closely aligned with the highest occupied molecular orbital of ClAlPc.
We report increased cell performance for boron subphthalocyanine chloride (SubPc)/fullerene (C60) organic photovoltaic (OPV) cells when thermally evaporated vanadium oxide (V2OX) thin films are incorporated as a hole-extracting layer at the indium-tin oxide (ITO)/SubPc interface. Ultra-violet photoemission spectroscopy (UPS) studies of the V2OX films reveal highly n-type character, with a large work function of 6.8 eV. This correlates well with recently reported data for other metal oxide hole-extracting layers, such as molybdenum oxide and tungsten oxide, in contrast to the p-type character previously reported for V2OX films. There is significant improvement in energy level alignment for hole-extraction when cells utilise the V2OX layer at the ITO/SubPc interface, resulting in substantial increases in open circuit voltage (VOC) and power conversion efficiency (ηp).