Structural defects can greatly inhibit electron transfer in two-dimensional (2D) layered polymeric carbon nitride (CN) unit, seriously lowering its utilization ratio of photogenerated charges during photocatalysis. Herein, we propose a new strategy based on intra-melon hydrogen bonding interactions in 2D CN frameworks to improve the crystallinity of CN. This concept was validated by removing some amino groups and connecting melon using codoped B and F atoms via a simple one-step sodium fluoroborate-assisted thermal treatment. The enhancement in crystallinity effectively promoted exciton dissociation and charge transfer in the CN nanosheets. Furthermore, the B/F dopants also improved the separation of photogenerated carriers by promoting charge capture. The highly efficient visible-light photocatalytic activity of the crystalline B/F-codoped CN nanosheets was demonstrated by degrading methyl orange, Rhodamine B, colorless phenol and tetracycline hydrochloride as models, where their degradation rate constant was more than 10, 5, 32 and 3 times higher than that of pure CN, respectively. Moreover, the B/F-codoped CN exhibited an excellent photoelectrocatalytic performance for the oxygen evolution reaction (OER), outperforming the precious-metal IrO2 catalyst. The simple and effective strategy proposed herein provides a direct route to engineer high crystallinity in 2D materials for tunable charge carrier separation and migration for electronic and optoelectronic applications.
2 November 2018 in Journal of Physics D: Applied Physics
Graphitic carbon nitride (g-C 3 N 4 ) has attracted increasing interest in recent years as a metal-free polymeric photocatalyst for water splitting and degradation of organic pollutants. However, the relatively low photocatalytic activity and serious aggregation of g-C 3 N 4 nanosheets substantially limit its applications. Herein, we propose a generalized and facile bottom-up approach to self-assembly synthesis of isotype heterojunction g-C 3 N 4 /g-C 3 N 4 nanosheets/0D metal oxide nanoparticles hierarchical architectures, in which the highly dispersed 0D metal oxide (CeO 2 and ZnO as representatives) nanoparticles are anchored on 2D flexible g-C 3 N 4 /g-C 3 N 4 heterojunction nanosheets, and the former can be spatially separated by the latter as well. The pyrolysis-induced gases play a critical role in the construction of unique 0D metal oxide/2D g-C 3 N 4 /g-C 3 N 4 (metal oxide/CN-UT) hierarchical architectures, which possess improved light harvesting and pollutant adsorption capacity, as well as enhanced separation of photoinduced charge carriers via the three-level electron–hole transfer process owing to the intimate contact between constituents and band alignment among them. As a result, the obtained metal oxide/CN-UT exhibits extraordinary photocatalytic performance under natural sunlight and indoor light illumination. This work demonstrates a generalized bottom-up synthetic method to design efficient composite photocatalysts by adopting integrative nanostructure engineering and a cocatalyst strategy and highlights the promising applications in the field of energy and environment.
Recently, the generation and detection of circularly polarized light (CPL) have attracted much attention due to their wide applications in various optical devices and techniques. The three-dimensional chiral metamaterials have acquired a giant chiral response, but complex processes make it difficult to be integrated directly into nanophotonic devices. In this work, a type of two-dimensional CPL photodetector based on the embedding nanoelectrodes is proposed. It is shown that quantum efficiency and circular polarization dichroism for the detector can be achieved as high as 23% and 75% at the wavelengths of 1550 nm, respectively. Furthermore, the difference in photoresponsivity is 21 mA W −1 .
We propose a new type of circularly polarized photodetector based on double-layer chiral planar metamaterial in the form of X shape. The metamaterial, realizing a high circular dichroism at 550-nm wavelength, is fabricated on a reverse-biased p-i-n diode. The light incident on the device, is filtered by the metamaterial, and then absorbed by the p-i-n diode, forming photocurrent. Our demonstrated circularly polarized photodetector have a strong ability to distinguish between left- and right-hand circularly polarized light and will be very promising for practical applications in optical communication of spin information, quantum-based optical computing, and circular dichroism spectroscopy.
5 March 2020 in IEEE Transactions on Nuclear Science
In order to mitigate the total-ionizing dose (TID) effects of the dual-direction silicon controlled rectifier based on laterally diffused MOS (LDMOS-DDSCR), a common-centroid layout arrangement with multiple octagonal units is proposed and fabricated in an 18 V Bipolar-CMOS-DMOS (BCD) process. The symmetrical characteristics of the bidirectional electrostatic discharge (ESD) protection are verified by transmission line pulse (TLP) tests. Gamma-ray irradiation experiments demonstrate that the proposed device is tolerant of TID effects up to 100 krad(Si), while the traditional finger-type LDMOS-DDSCR has lost its function at 50 krad(Si). Finally, the ESD performance is also characterized at high temperatures, which confirms that the proposed device is an excellent candidate for space applications.
12 March 2020 in Semiconductor Science and Technology
The reliability issues of integrated circuits are attracting more attention, especially in extreme environments like radiation and elevated temperature conditions. The impact of ionizing radiation and temperature effects on the electrostatic discharge (ESD) protection devices should not be negligible. In this paper, A low-voltage dual-direction silicon controlled rectifier (DDSCR) and a high-voltage DDSCR based on laterally diffused metal oxide semiconductor are chosen and fabricated in a 5 V/18 V Bipolar-CMOS-DMOS process. To study the combined effects of ESD and total-ionizing dose, transmission line pulse (TLP) measurements are conducted right after exposure to 60 Co gamma-ray up to 200 krad(Si). Besides, the TLP tests are performed at different temperatures ranging from 300 to 400 K to show the impact of elevated temperature on ESD devices. In the meanwhile, the physical mechanisms of the synergistic effects are investigated by means of three-dimensional (3D) TCAD simulations.