Ramki Kalyanaraman

Ramki Kalyanaraman

Auto-generated profile, based on publicly available information

Ramki Kalyanaraman

Univ Tennessee, Dept Chem & Biomol Engn, Knoxville, TN 37996 USA

Research Focus & Metrics

Academic Career Length

30Years (1997-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 June 2007 in Physical Review B
Verified
Journal Article
Closed access
PDF file
JTJustin Trice
Justin Trice
DTDennis Thomas
Dennis Thomas
CFChristopher Favazza
Christopher Favazza
RSRadhakrishna Sureshkumar
Radhakrishna Sureshkumar
RKRamki Kalyanaraman
Ramki Kalyanaraman
Hydrodynamic pattern formation (PF) and dewetting resulting from pulsed-laser-induced melting of nanoscopic metal films have been used to create spatially ordered metal nanoparticle arrays with monomodal size distribution on SiO2∕Si substrates. PF was investigated for film thickness h⩽7nm<laser absorption depth ∼11nm, and different sets of laser parameters, including energy density E and the irradiation time, as measured by the number of pulses n. PF was only observed to occur for E⩾Em, where Em denotes the h-dependent threshold energy required to melt the film. Even at such small length scales, theoretical predictions for Em obtained from a continuum-level lumped parameter heat transfer model for the film temperature, coupled with the one-dimensional transient heat equation for the substrate phase, were consistent with experimental observations provided that the thickness dependence of the reflectivity of the metal-substrate bilayer was incorporated into the analysis. The model also predicted that perturbations in h would result in intrinsic thermal gradients ∂T∕∂h whose magnitude and sign depend on h, with ∂T∕∂h>0 for h<hc and ∂T∕∂h<0 for h>hc≈9nm. For the thickness range investigated here, the resulting thermocapillary effect was minimal since the thermal diffusion time τH is less than or equal to the pulse time. Consequently, the spacing between the nanoparticles and the particle diameter were found to increase as h2 and h5∕3, respectively, which is consistent with the predictions of the thin-film hydrodynamic (TFH) dewetting theory. PF was characterized by the appearance of discrete holes followed by bicontinuous or cellular patterns which finally consolidated into nanoparticles via capillary flow rather than via Rayleigh-like instabilities reported for low-temperature dewetting of viscous liquids. This difference is attributed to the high capillary velocities of the liquid metal arising from its relatively large interfacial tension and low viscosity as well as the smaller length scales of the liquid bridges in the experiments. The predicted liquid-phase lifetime τL was between 2 and 15ns, which is much smaller than the dewetting time τD⩾25ns as predicted by the linear TFH theory. Therefore, dewetting required the application of multiple pulses. During the early stages of dewetting, the ripening rate, as measured by the rate of change of characteristic ordering length with respect to n, increased linearly with E due to the linear increase in τL with increasing E as predicted by the thermal model. The final nanoparticle spacing was robust, independent of E and n, and only dependent on h due to the relatively weak temperature dependence of the thermophysical properties of the metal (Co). These results suggest that fast thermal processing combined with the unique thermophysical parameters of metals can lead to a different pattern formation, including quenching of a wide range of length scales and morphologies.

1 August 2006 in Nanotechnology
Verified
Journal Article
Closed access
CFChristopher Favazza
Christopher Favazza
RKRamki Kalyanaraman
Ramki Kalyanaraman
RSRadhakrishna Sureshkumar
Radhakrishna Sureshkumar
We have observed nanopattern formation with robust and controllable spatial ordering by laser-induced dewetting in nanoscopic metal films. Pattern evolution in Co film of thickness 1≤h≤8 nm on SiO(2) was achieved under multiple pulse irradiation using a 9 ns pulse laser. Dewetting leads to the formation of cellular patterns which evolve into polygons that eventually break up into nanoparticles with unimodal size distribution and short range ordering in nearest neighbour spacing R. Spatial ordering was attributed to a hydrodynamic thin film instability and resulted in a predictable variation of R and particle diameter D with h. The length scales R and D were found to be independent of the laser energy. These results suggest that spatially ordered metal nanoparticles can be robustly assembled by laser-induced dewetting.

19 March 2010 in Nanotechnology
Verified
Journal Article
Closed access
HKH Krishna
H Krishna
RSR Sachan
R Sachan
JSJ Strader
J Strader
CFC Favazza
C Favazza
MKM Khenner
M Khenner
RKR Kalyanaraman
R Kalyanaraman
We show here that the morphological pathway of spontaneous dewetting of ultrathin Ag films on SiO2 under nanosecond laser melting is dependent on film thickness. For films with thickness h of 2 nm < or = h < or = 9.5 nm, the morphology during the intermediate stages of dewetting consisted of bicontinuous structures. For films with 11.5 nm < or = h < or = 20 nm, the intermediate stages consisted of regularly sized holes. Measurement of the characteristic length scales for different stages of dewetting as a function of film thickness showed a systematic increase, which is consistent with the spinodal dewetting instability over the entire thickness range investigated. This change in morphology with thickness is consistent with observations made previously for polymer films (Sharma and Khanna 1998 Phys. Rev. Lett. 81 3463-6; Seemann et al 2001 J. Phys.: Condens. Matter 13 4925-38). Based on the behavior of free energy curvature that incorporates intermolecular forces, we have estimated the morphological transition thickness for the intermolecular forces for Ag on SiO2. The theory predictions agree well with observations for Ag. These results show that it is possible to form a variety of complex Ag nanomorphologies in a consistent manner, which could be useful in optical applications of Ag surfaces, such as in surface enhanced Raman sensing.

21 March 2010 in Nature Materials
Verified
Journal Article
Closed access
MVMukund Vasudevan
Mukund Vasudevan
EBEric Buse
Eric Buse
DLDonglai Lu
Donglai Lu
HKHare Krishna
Hare Krishna
RKRamki Kalyanaraman
Ramki Kalyanaraman
RSRadhakrishna Sureshkumar
Radhakrishna Sureshkumar

2 July 2008 in Physical Review Letters
Verified
Journal Article
Closed access
PDF file
JTJustin Trice
Justin Trice
CFChristopher Favazza
Christopher Favazza
DTDennis Thomas
Dennis Thomas
HGHernando Garcia
Hernando Garcia
RKRamki Kalyanaraman
Ramki Kalyanaraman
RSRadhakrishna Sureshkumar
Radhakrishna Sureshkumar
When an ultrathin metal film of thickness h (<20  nm) is melted by a nanosecond pulsed laser, the film temperature is a nonmonotonic function of h and achieves its maximum at a certain thickness h*. This is a consequence of the h and time dependence of energy absorption and heat flow. Linear stability analysis and nonlinear dynamical simulations that incorporate such intrinsic interfacial thermal gradients predict a characteristic pattern length scale Λ that decreases for h>h*, in contrast to the classical spinodal dewetting behavior where Λ increases monotonically as h2. These predictions agree well with experimental observations for Co and Fe films on SiO2.

1 July 2000 in Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
DWD. L. Windt
D. L. Windt
FCF. E. Christensen
F. E. Christensen
WCW. W. Craig
W. W. Craig
CHC. Hailey
C. Hailey
FHF. A. Harrison
F. A. Harrison
PMP. H. Mao
P. H. Mao
We describe the development of depth-graded W/Si multilayer films prepared by magnetron sputtering for use as broad-band reflective coatings for hard x-ray optics. We have used specular and nonspecular x-ray reflectance analysis to characterize the interface imperfections in both periodic and depth-graded W/Si multilayer structures, and high-resolution transmission electron microscopy (TEM) and selected area electron diffraction (SAED) to characterize the interface structure and layer morphology as a function of depth in an optimized depth-graded multilayer. From x-ray analysis we find interface widths in the range σ=0.275–0.35 nm for films deposited at low argon pressure (with a slight increase in interface width for multilayers having periods greater than ∼20 nm, possibly due to the transition from amorphous to polycrystalline metal layers identified by TEM and SAED), and somewhat larger interface widths (i.e., σ=0.35–0.4 nm) for structures grown at higher Ar pressures, higher background pressures, or with larger target-to-substrate distances. We find no variation in interface widths with magnetron power. Nonspecular x-ray reflectance analysis and TEM suggest that the dominant interface imperfection in these films is interfacial diffuseness; interfacial roughness is minimal (σr∼0.175 nm) in structures prepared under optimal conditions, but can increase under conditions in which the beneficial effects of energetic bombardment during growth are compromised. X-ray reflectance analysis was also used to measure the variation in the W and Si deposition rates with bilayer thickness: we find that the W and Si layer thicknesses are nonlinear with the deposition times, and we discuss possible mechanisms responsible for this nonlinearity. Finally, hard x-ray reflectance measurements made with synchrotron radiation were used to quantify the performance of optimized depth-graded W/Si structures over the photon energy range from 18 to 212 keV. We find good agreement between the synchrotron measurements and calculations made using either 0.3 nm interface widths, or with a depth-graded distribution of interface widths in the range σ=0.275–0.35 nm (as suggested by 8 keV x-ray and TEM analyses) for a structure containing 150 bilayers, and designed for high reflectance over the range 20 keV<E<70 keV. We also find for this structure good agreement between reflectance measurements and calculations made for energies up to 170 keV, as well as for another graded W/Si structure containing 800 bilayers, designed for use above 100 keV, where the peak reflectance was measured at E=212 keV to be R=76.5±4% at a graze angle of θ=0.08°.