Nathan Okey

Nathan Okey

Auto-generated profile, based on publicly available information

Nathan Okey

Department of Mechanical Engineering, University of Minnesota, Minneapolis, MN, USA

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 August 2025 in International Journal of Engine Research
Verified
Journal Article
Closed access
AVAlex Voris
Alex Voris
SKSeamus Patrick Kane
Seamus Patrick Kane
SWSilas Wüthrich
Silas Wüthrich
SRShawn Reggeti
Shawn Reggeti
NONathan Okey
Nathan Okey
WNWilliam F Northrop
William F Northrop
Anhydrous ammonia (NH 3 ) is a zero-carbon fuel that has a higher volumetric energy density and can be more easily transported and stored than gaseous or liquid hydrogen. Challenges associated with ammonia’s low laminar flame speed and high ignition energy have limited its use in the past. Many experimental efforts have attempted to overcome these limitations in internal combustion engines by blending ammonia with hydrogen or another higher reactivity fuel; however, reducing complexity by enabling pure ammonia fueling is desirable from the perspective of widespread implementation. This experimental study investigates the full operating map of a single-cylinder version of a 6.7-L displacement diesel engine retrofitted for 100% ammonia spark ignition (SI) operation. Performance and emissions measurements were completed across the full operational map with additional sweeps of spark timing and equivalence ratio conducted at selected conditions. The engine maintained stable operation above 4 bar IMEP g across the entire tested map and maintained gross fuel consumption values of 250 g/kWh diesel equivalent or less when above idle speed and 50% load. Slightly rich (φ = 1.025 ± 0.015) operation was maintained across the test conditions to minimize the three emissions of interest (NH 3 , NO x , and N 2 O) and was controlled using the measured raw NO x concentration. Emissions control using exhaust NO x concentration, as opposed to O 2 , proved to be a promising approach to maintain constant NH 3 /NO x ratios across a large portion of the operational map.