An 800M/1.8G/2.4GHz multi-band multi-standard single chain transceiver is presented to support terminals under NB-IoT, BLE and Zigbee protocols. The multi-branch co-wound transformer structure co-designed with RF front-end blocks (i.e. LNA & Power Mixer) is proposed and adopted for compact and efficient in-out matching with moderate Q value. Such co-designed topology enables the single transceiver chain to cover wide-spreading frequency ranging over three times of its minimum band frequency, without compromising performance. The measurement shows that, in receiver chain, the sensitivity is better than -102 dBm, consuming less than 20mW, in transmitter chain, the EVM is 4.63% and 5.2% for NB-IoT multi-tone 12-tone transmission with 0dBm output power in LB and MB. The transceiver has been implemented in 65nm CMOS process, with 1.5mm2 and 0.6mm2 for receiver and transmitter, respectively. The design is consistent with the requirement of low-cost multi-standard Internet-of-Things (IoT) applications.
8 January 2024 in IEEE Transactions on Circuits and Systems II: Express Briefs
A 0.4-6 GHz multi-mode blocker-tolerant receiver implemented in 65 nm CMOS process is presented. A π-type Capacitor-Inductor-Capacitor (CLC) current matching network is proposed for N-path-based bandpass low noise transconductance amplifier (BLNTA) to extend bandwidth. Moreover, an improved NAND-based windmill divider is proposed to expand the upper frequency of clocks to at least 8 GHz in all corners. Adaptive bias circuits are introduced to stabilize performance. Measurement results show that the receiver can achieve frequency selectivity in all 0.4-6 GHz bands. The receiver’s maximum gain is 37 dB, with the minimum double sideband (DSB) noise figure (NF) of 3.4 dB. The in-band (IB) input third-order intercept point (IIP3) is -1.2 dBm, and the out-of-band (OoB) IIP3 is 13.9 dBm. The overall power consumption is 46.5 mW+2.5 mW/GHz. The receiver aims to support cellular protocols for vehicle-to-everything (V2X) applications.