We report a nanoparticulate lead oxide-carbon composite based rechargeable lithium battery anode. The composite is formed by pyrolyzing lead citrate, produced in the recycling of the lead paste of old lead acid batteries. The lead oxide nanoparticles of the composite are encased in, and supported by, flexible and conductive carbon. The encasing carbon buffers the expansion/shrinkage caused by lithiation/de-lithiation of lead, aiding in the maintenance of structural integrity and capacity retention throughout extensive cycling. 90% of the initial reversible gravimetric capacity of 385 mAh g −1 and volumetric capacity of 622 mAh cm −3 is retained after 400 cycles at a specific current density of 225 mA g −1 (C/2). 94% of the initial reversible gravimetric capacity of 429 mAh g −1 and volumetric capacity of 673 mAh cm −3 is retained after 400 cycles at a specific current of 113 mA g −1 (C/4). Employing techniques such as X-ray diffraction, thermal gravimetric analysis, cross-sectional scanning electron microscopy, X-ray photoelectron spectroscopy, and Raman spectroscopy, we investigate how the structural composition of the PbO-C promotes its high capacity retention throughout prolonged galvanostatic cycling.
Long duration energy storage is needed to accelerate decarbonization. Lithium-ion batteries are currently state-of-the-art but require costly transition metal oxide cathodes, which can limit their scalability. Dual-graphite batteries are a promising battery chemistry that pairs a graphite anode with a graphite cathode, where cation and anion intercalation occurs, respectively. Conventional small molecule-based electrolytes face safety issues due to their flammability and volatility and limit the energy density of dual-graphite batteries due to the presence of species other than the active ions. Molten salt electrolytes are thus a promising alternative to conventional dual-graphite battery electrolytes due to their intrinsic safety and energy density. Here, we report the investigation of a low melting, single-cation imide-based binary molten salt electrolyte for dual-graphite batteries. We find that both anions in the Li(FSI)x(FTFSI)1-x electrolytes studied reversibly intercalate into graphite cathodes, but that FTFSI preferentially intercalates and is present in greater compositions in anion-graphite intercalation compounds compared to the bulk electrolytes. Furthermore, we find that lithium co-intercalates with the anions suggesting the inability of anions to de-solvate from tightly bound aggregate networks. The systematic investigation of anion and cation (co)-intercalation behavior from imide-based molten salts is important to guide future design of next generation solvent-free and transition-metal-free dual-ion batteries.