18 November 2020 in Materials Advances
Metal halide perovskites (MHPs) are frontrunners among solution-processable materials for lightweight, large-area and flexible optoelectronics. These materials, with the general chemical formula AMX3, are structurally complex, undergoing multiple polymorph transitions as a function of temperature and pressure. In this review, we provide a detailed overview of polymorphism in three-dimensional MHPs with A = Cs+, MA+, or FA+, M = Pb2+ or Sn2+, and X = Cl-, Br-, or Pb-. In general, perovskites adopt a highly symmetric cubic structure at elevated temperatures. With decreasing temperatures, the corner-sharing MX6 octahedra tilt with respect to one another, resulting in multiple polymorph transitions to lower-symmetry tetragonal and orthorhombic structures. The temperatures at which these phase transitions occur can be tuned via different strategies, including crystal size reduction, confinement in scaffolds and (de-)pressurization. As discussed in the final section of this review, these solid-state phase transformations can significantly affect optoelectronic properties. Understanding factors governing these transitions is thus critical to the development of high-performance, stable devices.
6 July 2021 in Chemical Society Reviews
Solution-processable organic materials for emerging electronics can generally be divided into two classes of semiconductors, organic small molecules and polymers. The theoretical thermodynamic limits of device performance are largely determined by the molecular structure of these compounds, and advances in synthetic routes have led to significant progress in charge mobilities and light conversion and light emission efficiencies over the past several decades. Still, the uncontrolled formation of out-of-equilibrium film microstructures and unfavorable polymorphs during rapid solution processing remains a critical bottleneck facing the commercialization of these materials. This tutorial review provides an overview of the use of nanoconfining scaffolds to impose order onto solution-processed semiconducting films to overcome this limitation. For organic semiconducting small molecules and polymers, which typically exhibit strong crystal growth and charge transport anisotropy along different crystallographic directions, nanoconfining crystallization within nanopores and nanogrooves can preferentially orient the fast charge transport direction of crystals with the direction of current flow in devices. Nanoconfinement can also stabilize high-performance metastable polymorphs by shifting their relative Gibbs free energies via increasing the surface area-to-volume ratio. Promisingly, such nanoconfinement-induced improvements in film and crystal structures have been demonstrated to enhance the performance and stability of emerging optoelectronics that will enable large-scale manufacturing of flexible, lightweight displays and solar cells.
6 March 2023 in Advanced Functional Materials
29 August 2022 in Advanced Functional Materials
26 December 2020 in Soft Matter
For organic semiconductor crystals exhibiting anisotropic charge transport along different crystallographic directions, nanoconfinement is a powerful strategy to control crystal orientation by aligning the fast crystallographic growth direction(s) with the unconfined axis(es) of nanoconfining scaffolds. Here, design rules are presented to relate crystal morphology, scaffold geometry, and orientation control in solution-processed small-molecule crystals. Specifically, organic semiconductor triisopropylsilylethynyl pyranthrene needle-like crystals with a dimensionality of n = 1 and perylene platelike crystals with n = 2 were grown from solution within nanoconfining scaffolds comprising cylindrical nanopores with a dimensionality of m = 1, representing one unconfined dimension along the cylinder axis, and those comprising nanopillar arrays with a dimensionality of m = 2. For m = n systems, native crystal growth habits were preserved while the crystal orientation in n = m direction(s) was dictated by the geometry of the scaffold. For n ≠ m systems, on the other hand, orientation control was restricted within a single plane, either parallel or perpendicular to the substrate surface. Intriguingly, control over crystal shape was also observed for perylene crystals grown in cylindrical nanopores (n > m). Within the nanopores, crystal growth was restricted along a single direction to form a needle-like morphology. Once growth proceeded above the scaffold surface, the crystals adopted their native growth habit to form asymmetric T-shaped single crystals with concave corners. These findings suggest that nanoporous scaffolds with spatially-varying dimensionalities can be used to grow single crystals of complex shapes.
18 August 2026 in ChemRxiv
In this work, we demonstrate the oriented growth of quasi-2D metal halide perovskite nanowire and nanoplate arrays with continuous corner-sharing metal halide octahedra sheets normal to the substrate surface, the optimal orientation for device stacks. Oriented perovskite growth is achieved through two-step deposition in TiO 2 nanoporous scaffolds in which PbI 2 films are immersed in co-solutions of formamidinium iodide (FAI) and n-butylammonium iodide (BAI) in isopropyl alcohol to form metal halide perovskites. At 50 mol% FAI or higher relative to BAI, only 3D FAPbI 3 ( n = ∞) nanowires form at room temperature. BAI does not incorporate into the crystal lattice at these concentrations but stabilizes semiconducting α-FAPbI 3 from converting to insulating δ-FAPbI 3 , the thermodynamically stable phase at room temperature. Immersion in solutions with 33 mol% FAI or lower results in quasi-2D (BA) 2 (FA)Pb 2 I 7 ( n = 2) or 2D (BA) 2 PbI 4 ( n = 1) nanoplate growth. In situ photoluminescence spectra collected during crystal growth revealed the presence of intermediate n >2 phases before conversion to the thermodynamically favored phase at some compositions. Vertical gradients in n number were also identified by monitoring photoluminescence from the tops and bottoms of films, with α-FAPbI 3 and low n phases preferentially forming at the film surfaces and buried interfaces, respectively. Proof-of-concept conductivity mapping via atomic force microscopy demonstrates that these compositionally-graded nanocrystalline arrays are photoconductive, with highest conductivity normal to the substrate.