Low‐cost and nontoxic deep eutectic liquid electrolytes (DELEs), such as [AlCl3]1.3[Urea] (AU), are promising for rechargeable non‐aqueous aluminum metal batteries (AMBs). However, their high viscosity and sluggish ion transport at room temperature lead to high cell polarization and low specific capacity, limiting their practical application. Herein, non‐solvating 1,2‐difluorobenzene (dFBn) is proposed as a co‐solvent of DELEs using AU as model to construct a locally concentrated deep eutectic liquid electrolyte (LC‐DELE). dFBn effectively improves the fluidity and ion transport without affecting the ionic dynamics in the electrolyte. Moreover, dFBn also modifies the solid electrolyte interphase growing on the aluminum metal anodes and reduces the interfacial resistance. As a result, the lifespan of Al/Al cells is improved from 210 to 2000 h, and the cell polarization is reduced from 0.36 to 0.14 V at 1.0 mA cm−2. The rate performance of Al‐graphite cells is greatly improved with a polarization reduction of 0.15 and 0.74 V at 0.1 and 1 A g−1, respectively. The initial discharge capacity of Al‐sulfur cells is improved from 94 to 1640 mAh g−1. This work provides a feasible solution to the high polarization of AMBs employing DELEs and a new path to high‐performance low‐cost AMBs.
31 January 2024 in Angewandte Chemie International Edition
Aluminum−sulfur (Al−S) batteries are promising energy storage devices due to their high theoretical capacity, low cost, and high safety. However, the high viscosity and inferior ion transport of conventionally used ionic liquid electrolytes (ILEs) limit the kinetics of Al−S batteries, especially at sub‐zero temperatures. Herein, locally concentrated ionic liquid electrolytes (LCILE) formed via diluting the ILEs with non‐solvating 1,2‐difluorobenzene (dFBn) co‐solvent are proposed for wide‐temperature‐range Al−S batteries. The addition of dFBn effectively promotes the fluidity and ionic conductivity without affecting the AlCl4−/Al2Cl7− equilibrium, which preserves the reversible stripping/plating of aluminum and further promotes the overall kinetics of Al−S batteries. As a result, Al−S cells employing the LCILE exhibit higher specific capacity, better cyclability, and lower polarization with respect to the neat ILE in a wide temperature range from −20 to 40 °C. For instance, Al−S batteries employing the LCILE sustain a remarkable capacity of 507 mAh g−1 after 300 cycles at 20 °C, while only 229 mAh g−1 is delivered with the dFBn‐free electrolyte under the same condition. This work demonstrates the favorable use of LCILEs for wide‐temperature Al−S batteries.