26 November 2024 in Automation, Control and Intelligent Systems
This research results from the need for an effective, reliable, and highly flexible method of control of processes within a small pharmaceutical environment and will be programmed using Ladder Logic programming Language, Siemens Step 7, which entails integrating hardware and software to provide dependable and effective operations. The mixer is controlled through a Supervisory Control and Data Acquisition (SCADA) system and programmed using Ladder Logic in Siemens Step 7 PLC Programming Software. Temperature control, agitation control, and ingredient addition sequences were all integrated by the automated system. The performance of the modeled system is validated through computer simulations. The Batch Mixer is controlled using a Variable Speed Drive (VSD), enabling precise execution of the required processes throughout the entire mixing cycle. Each phase of the process is carefully controlled and monitored, with detailed simulation results demonstrating enhanced performance and efficiency in the proposed batch mixer system, as well as offering a mathematical model of the Batch Mixer and outlining the performance variables that the PLC systems use in detail. As a backup validation tool, Rockwell Automation's RSLogix 5000 PLC is used to verify the validation. The study demonstrates the effectiveness of using Siemens STEP 7 PLC for automation and validation, and with RSLogix 5000 PLC for confirmation of validation, ensuring reliable and efficient pharmaceutical batch mixing operations.
8 January 2026 in Journal of Electrical and Electronic Engineering
This paper investigates the transition of traditional electricity transmission systems into modern, low-carbon network essential for mitigating climate change and ensuring energy sustainability. The electricity sector remains a major contributor to global greenhouse gas emissions, making transmission modernization critical for large-scale integration of renewable energy sources such as solar, wind, and hydro. This study proposes a comprehensive carbon-aware control framework that integrates smart grid technologies, energy storage systems, and dynamic optimization models to enhance grid efficiency, reliability, and emissions performance. Using Ghana's power system as a case study, the research develops a MATLAB-based simulation of a 10-bus transmission network incorporating real-world generation data, load forecasting, and geographical analysis of renewable potential. Results indicate that integrating renewable energy with energy storage can reduce CO 2 emissions by up to 50%, from 238,000 kg to 119,000 kg, though economic viability remains challenging without policy support, subsidies, or carbon credits. The simulation also highlights the role of energy storage in smoothing intermittent generation and maintaining system stability. Financial analysis and load growth projections reinforce the need for scalable investment models and regulatory reforms to support long-term de-carbonization. The proposed framework bridges the gap between emissions metrics and grid operations, offering a robust tool for policy makers, utilities, and researchers. The findings demonstrate that a low-carbon grid is both technically feasible and environmentally necessary for a sustainable energy future.
20 September 2026 in Automation, Control and Intelligent Systems
A mathematical model and dynamic performance study of a Supervisory Control and Data Acquisition (SCADA) system and a Programmable Logic Controller (PLC) that were previously utilized to automate the pharmaceutical batch mixer are presented in this research. While the earlier work implemented the discrete, sequential control logic for the mixer using Siemens STEP 7 and validated it with RSLogix 5000, the continuous-time hydraulic behaviour of the three interconnected process vessels (heating, mixing and storage tanks) had not been characterised. In this study, the batch mixing system is partitioned into three sections, each represented by a pump-and-tank arrangement, and first-principles mass-balance, Bernoulli energy-balance and Darcy friction-loss equations are used to derive the transfer functions relating pump flow rate and tank level to valve resistance and tank cross-sectional area. Laplace transformation of the governing equations yields an overall block-diagram model of the three-tank system, which is implemented and simulated in MATLAB/SIMULINK. The simulation results show that the flow response settles at 0.5 m3/s with a settling time of 1.32 x 10^4 seconds, an overshoot of 11.5% and a rise time of 4.03 x 10^3 seconds. The tank-level responses show a successive filling pattern consistent with the batching sequence, with Tank 1 filling within 20 minutes, Tank 2 reaching its maximum level at 65 minutes, and Tank 3 completing filling at 210 minutes from the start of the process. These results confirm that the batch mixer exhibits stable, well-damped dynamic behaviour, providing a quantitative basis for the timer presets and control logic used in the PLC-SCADA automation reported previously, and supporting the suitability of the process for closed-loop SCADA-based control.