The environmental benefits of fuel cells and electrolyzers have become increasingly recognized in recent years. Fuel cells and electrolyzers that can operate at intermediate temperatures (300–450 °C) require, in principle, neither the precious metal catalysts that are typically used in polymer‐electrolyte‐membrane systems nor the costly heat‐resistant alloys used in balance‐of‐plant components of high‐temperature solid oxide electrochemical cells. These devices require an electrolyte with high ionic conductivity, typically more than 0.01 S cm−1, and high chemical stability. To date, however, high ionic conductivities have been found in chemically unstable materials such as CsH2PO4, In‐doped SnP2O7, BaH2, and LaH3−2xOx. Here, fast and stable proton conduction in 60‐at% Sc‐doped barium zirconate polycrystal, with a total conductivity of 0.01 S cm−1 at 396 °C for 200 h is demonstrated. Heavy doping of Sc in barium zirconate simultaneously enhances the proton concentration, bulk proton diffusivity, specific grain boundary conductivity, and grain growth. An accelerated stability test under a highly concentrated and humidified CO2 stream using in situ X‐ray diffraction shows that the perovskite phase is stable over 240 h at 400 °C under 0.98 atm of CO2. These results show great promises as an electrolyte in solid‐state electrochemical devices operated at intermediate temperatures.
In this study, the efficiency of ionic transport through proton-conducting ceramic electrolytes for energy conversion applications was discussed while considering the energy losses caused by the mixed ionic and electronic conduction and by the ionic transport resistance. It was shown that high energy efficiency cannot be expected with an extremely thin electrolyte because of the significant energy loss due to the internal current leakage. In the case of a fuel cell with a BaZr0.8Y0.2O3−δ electrolyte operating at 873 K, the maximum energy efficiency was estimated to be only 82% when the product of the external current density and the electrolyte thickness was 1.7 × 10−3 A cm−1. The energy efficiency for the ionic transport in BaZr0.8Y0.2O3−δ was compared with those for typical oxide ion conductors, i.e. yttria stabilized zirconia and Ce0.9Gd0.1O1.95−δ, under various fuel cell operating conditions. BaZr0.8Y0.2O3−δ can provide higher energy efficiency than the oxide ion conductors at lower temperatures and under higher current conditions. For the efficient operation of fuel cells using a proton-conducting ceramic as an electrolyte, lower operating temperatures below 873 K is preferable from the viewpoint of energy loss in the electrolyte. The influence of the partial conductivity variation on the energy efficiency was also discussed. It was shown that not only the increase of ionic conductivity but also the decrease of electronic conductivity could improve the energy efficiency if the electrolyte thickness can be optimized. This means that decreasing electronic conductivity as well as increasing proton conductivity can be an effective strategy to develop highly efficient proton conductors for energy conversion applications.
20 September 2018 in Journal of Materials Chemistry A
Proton conducting Ba(Zr0.5Ce0.4)8/9Y0.2O2.9 is employed as a potential steam electrolysis electrolyte for hydrogen production at intermediate temperature.
1 February 2017 in International Journal of Hydrogen Energy