1 November 2015 in Journal of Aircraft
A key design factor impacting the use of electrical power to drive aircraft systems and subsystems is energy efficiency. With the design of an all-electric, hybrid ice protection system, energy consumption can be reduced to a large extent. The hybridization is achieved through an intentional partitioning of the ice at the stagnation line by melting via surface heating and ice shedding in the unheated regions of the airfoil surface via an electromechanical deicing system based on piezoelectric multilayer actuators. To further reduce energy consumption, the adhesion forces between the ice and the airfoil surface can be reduced using an ultrasmooth, nanostructured surface with water- and ice-repellent properties that encourages ice shedding. Experimental investigations, performed in a laboratory-scale icing wind tunnel for a small-scale configuration, reveal that the hybrid approach for ice protection reliably sheds the ice accreted on the airfoil surface. Compared with an all-thermoelectric system for ice protection investigated in the same icing wind tunnel facility using identical test conditions, the hybrid approach was demonstrated to reduce power consumption up to 91%. Beyond the laboratory tests, numerical simulations of the hybrid strategy analogous to the one used for the experiments are performed. The time history of the residual ice shapes aft of the heated region is simulated using the ice accretion prediction software LEWICE2D for a wet-running anti-icing subsystem. Finite element analyses of the effects of the piezoelectric actuators are then performed using Abaqus to investigate the ice-shedding capability in the unheated regions of the airfoil surface. The numerical results show that the variation in the different ice shapes affects the stiffness of the model. It becomes obvious that the critical threshold for ice shedding, that is, the stiffness that determines whether residual ice delaminates from the airfoil surface, is affected to a minor extent by the interfacial area and predominantly by the thickness of the ice layer. Further, the simulation results correlate well with experimental results obtained in the icing wind tunnel. It can be concluded that reliable operation of the hybrid system for ice shedding can be guaranteed when using a harmonic sweep excitation able to excite the structure at its resonance.
1 January 1998 in Journal of Manufacturing Systems
5 November 2007 in IEEE Transactions on Visualization and Computer Graphics
Pipeline architectures provide a versatile and efficient mechanism for constructing visualizations, and they have been implemented in numerous libraries and applications over the past two decades. In addition to allowing developers and users to freely combine algorithms, visualization pipelines have proven to work well when streaming data and scale well on parallel distributed- memory computers. However, current pipeline visualization frameworks have a critical flaw: they are unable to manage time varying data. As data flows through the pipeline, each algorithm has access to only a single snapshot in time of the data. This prevents the implementation of algorithms that do any temporal processing such as particle tracing; plotting over time; or interpolation, fitting, or smoothing of time series data. As data acquisition technology improves, as simulation time-integration techniques become more complex, and as simulations save less frequently and regularly, the ability to analyze the time-behavior of data becomes more important. This paper describes a modification to the traditional pipeline architecture that allows it to accommodate temporal algorithms. Furthermore, the architecture allows temporal algorithms to be used in conjunction with algorithms expecting a single time snapshot, thus simplifying software design and allowing adoption into existing pipeline frameworks. Our architecture also continues to work well in parallel distributed-memory environments. We demonstrate our architecture by modifying the popular VTK framework and exposing the functionality to the ParaView application. We use this framework to apply time-dependent algorithms on large data with a parallel cluster computer and thereby exercise a functionality that previously did not exist.
1 January 1997 in Journal of Manufacturing Systems