30 January 2018 in IEEE Transactions on Haptics
In this paper, we report on an airborne vibrotactile display with a multiunit ultrasound phased array synthetic aperture. The system generates an ultrasound field with a location-tunable focus in the air, which exerts time-variant acoustic radiation pressure on the users skin, resulting in perceivable localized vibrotactile stimuli. The paper contains three major new contributions from previous related works. The first is an experimental validation of large-aperture focusing with improved synchronization offering an enlarged workspace in which sufficient acoustic power concentration is guaranteed. From the experiments, it is expected that perceivable vibrotactile focus can be generated 1 m away from a four-unit array system. The second is an experimental evaluation of the presented pressure for producing a broad variety of tactile perception, which shows that the generated ultrasound focus can serve as an vibrotactile actuator that has flat frequency characteristics in the domain of perceptual stimuli. The third is a psychophysical result of the detection threshold curve for sinusoidal stimuli offered by the system. The obtained curve shows similarity with conventionally known results, which have minimum values at approximately 200 Hz.
17 October 2019 in IEEE Transactions on Haptics
We report a new vibrotactile modulation method of midair ultrasound focus namely, lateral modulation (LM), in which the focus quickly moves along a small cyclic trajectory and provides stronger and clearer vibrotactile stimuli than those by the conventional amplitude modulation (AM) method. Midair ultrasound haptics has an essential technical advantage of offering remote, non-contact, and pinpoint tactile stimuli on device-free bare skin. On the other hand, lack of clarity in the presented vibrotactile sensation has often been pointed out, and until now, an AM focus has been valid only on glabrous skin. Our main scientific contribution of the study is to verify the LM method, with the following experimental findings newly obtained. We confirmed that with the same maximum output amplitude of the ultrasound phased arrays, LM stimuli with circular focal trajectories were sensed stronger than AM stimuli by glabrous skin and hairy skin in a modulation frequency of 10-200 Hz. We also found that the detection threshold in glabrous skin mainly depended on the focal speed, whereas the tendency in hairy skin was different from that. With these results, we discuss a basis of perceptional mechanism that responds to LM stimuli, along with practical aspects of potential applications.
4 June 2021 in IEEE Transactions on Haptics
In this study, we achieved a noncontact tactile display that presents a pinpoint and instantaneous cooling sensation on the skin surface with no devices directly in contact with the user's body. We employed ultrasound phased arrays to generate a focused ultrasound, which locally and instantaneously expedites the vaporization of room-temperature water mist floating near the surface of the user's skin, offering a sudden pinpoint cooling sensation. In this article, we describe the physical configuration of the proposed method and show the measurement results, demonstrating how the user's skin surface was cooled. During the experiments, we discovered that a part of the skin exposed to a focused ultrasound within the floating mist was selectively cooled with negligible delay. Our prototype system offers a cooling spot of approximately 15 mm in diameter, which causes a temperature decrease of 4.6 K in 1 s and 3.3 K in the first 0.5 s on a hand situated 500 mm away from the device. Additionally, the ultrasound-driven cooling spot can be controlled on the skin surface, which is felt as a cool moving spot. Such a position-free cooling system with a high spatiotemporal resolution will open the door to unprecedented practical tactile applications.
6 February 2019 in Journal of Applied Physics
We established a method for generating an ultrasound beam that propagates along a narrow, isolated curved path and is accompanied by an arc-shaped airflow, and experimentally confirmed the actual generation of such a beam. The method employs a two-dimensional orthogonal phased array of ultrasound transducers, whose individual columns correspond to a line segment in a given beam trajectory. Each column of transducers yields a “ring” in which acoustic energy is concentrated. A cluster of these ultrasound rings arranged at sufficiently small spatial intervals interfere with adjacent rings, consequently forming a fine curved path of propagating ultrasound accompanied by an ultrasound-driven air flow. The positions of these rings can be electronically controlled and so can the position of the resulting beam path. We obtained isolated sharp arc-shaped airflows propagating over nearly 1 m in open space. Such airflows have never been reported and are extremely difficult to generate by the superposition of ordinary jet-driven airflows. Our achievement will lead to the ability to generate airflows along an arbitrarily designed three-dimensional arc-shaped path. This technique will be utilized in such unprecedented applications as midair transportation of gaseous substance or control of heat in the air while circumventing obstacles, which are intuitive, yet hard to achieve by other methods.