Department of Electrical and Computer Engineering and Waterloo Institute for Nanotechnology, University of Waterloo, 200 University Avenue West, Waterloo, Ontario N2L 3G1, Canada
Auto-generated profile, based on publicly available information
Hany Aziz
Department of Electrical and Computer Engineering and Waterloo Institute for Nanotechnology, University of Waterloo, 200 University Avenue West, Waterloo, Ontario N2L 3G1, Canada
The rapid development of microfluidics and lab-on-a-chip (LoC) technologies have allowed for the efficient separation and manipulation of various biomaterials, including many diagnostically relevant species. Organic electronics have similarly enjoyed a great deal of research, resulting in tiny, highly efficient, wavelength-selective organic light-emitting diodes (OLEDs) and organic photodetectors (OPDs). We consider the blend of these technologies for rapid detection and diagnosis of biological species. In the ideal system, optically active or fluorescently labelled biological species can be probed via light emission from OLEDs, and their subsequent light emission can be detected with OPDs. The relatively low cost and simple fabrication of the organic electronic devices suggests the possibility of disposable test arrays. Further, with full integration, the finalized system can be miniaturized and made simple to use. In this review, we consider the design constraints of OLEDs and OPDs required to achieve fully organic electronic optical bio-detection systems. Current approaches to integrated LoC optical sensing are first discussed. Fully realized OLED- and OPD-specific photoluminescence detection systems from literature are then examined, with a specific focus on their ultimate limits of detection. The review highlights the enormous potential in OLEDs and OPDs for integrated optical sensing, and notes the key avenues of research for cheap and powerful LoC bio-detection systems.
The synthesis and properties of a new polymer semiconductor comprising an electron accepting pyridine-flanked DPP unit and an electron-donating thieno[3,2-b]thiophene unit are reported. This polymer has rather low-lying energy levels, which allows transporting both electrons and holes. High crystallinity and a shorter π–π stacking distance of 0.36 nm are achieved due to the strong intermolecular interaction, which are beneficial for charge carrier transport in organic thin film transistors (OTFTs). Well-balanced high electron and hole mobilities up to 3.36 cm2 V−1 s−1 and 2.65 cm2 V−1 s−1, respectively, are obtained in top-gate bottom-contact OTFT devices using gold as source and drain contacts. When the contact electrodes are modified with an ultrathin layer (∼3 nm) of polyethylenimine (PEI) to suppress hole injection, a unipolar n-type semiconductor performance with a high electron mobility of 2.38 cm2 V−1 s−1 is realized.
ZnO nanoparticles are widely used for the electron transport layers (ETLs) of quantum dots light emitting devices (QLEDs). In this work we show that incorporating fluorine (F) into the ZnO ETL results in significant enhancement in device electroluminescence stability, leading to LT50 at 100 cd m−2 of 2,370,000 h in red QLED, 47X longer than the control devices. X-ray photo-electron spectroscopy, time-of-flight secondary ion mass spectroscopy, photoluminescence and electrical measurements show that the F passivates oxygen vacancies and reduces electron traps in ZnO. Transient photoluminescence versus bias measurements and capacitance–voltage-luminance measurements reveal that the CF4 plasma-treated ETLs lead to increased electron concentration in the QD and the QD/hole transport layer interface, subsequently decreasing hole accumulation, and hence the higher stability. The findings provide new insights into the critical roles that optimizing charge distribution across the layers play in influencing stability and present a novel and simple approach for extending QLED lifetimes.