23 February 2018 in Natural Hazards and Earth System Sciences
Steep, hardly accessible cliffs of rhyolite tuff in NE Hungary are prone to rockfalls, endangering visitors of a castle. Remote sensing techniques were employed to obtain data on terrain morphology and to provide slope geometry for assessing the stability of these rock walls. A RPAS (Remotely Piloted Aircraft System) was used to collect images which were processed by Pix4D mapper (structure from motion technology) to generate a point cloud and mesh. The georeferencing was made by Global Navigation Satellite System (GNSS) with the use of seven ground control points. The obtained digital surface model (DSM) was processed (vegetation removal) and the derived digital terrain model (DTM) allowed cross sections to be drawn and a joint system to be detected. Joint and discontinuity system was also verified by field measurements. On-site tests as well as laboratory tests provided additional engineering geological data for slope modelling. Stability of cliffs was assessed by 2-D FEM (finite element method). Global analyses of cross sections show that weak intercalating tuff layers may serve as potential slip surfaces. However, at present the greatest hazard is related to planar failure along ENE–WSW joints and to wedge failure. The paper demonstrates that RPAS is a rapid and useful tool for generating a reliable terrain model of hardly accessible cliff faces. It also emphasizes the efficiency of RPAS in rockfall hazard assessment in comparison with other remote sensing techniques such as terrestrial laser scanning (TLS).
1 December 2003 in Acta Biologica Hungarica
Sensory neuropathy is common symptom of the diabetes mellitus and the prevalence of oral lesions is higher in diabetic patients. The distribution of substance P was studied immunohistochemically in streptozotocin induced diabetic rat's tongue. The morphological association of sensory nerves (substance P immunoreactive) with mast cells (nerve fibre-mast cell contact) was monitored. The substance P nerve fibre mast cell contacts were very scanty in control tongue. The number of substance P nerve terminals and mast cells was significantly increased (p < 0.05) in diabetes mellitus after 4 weeks of the treatment compared with the control tongue. The number of mast cell nerve contacts was even more significantly increased (p < 0.001) in diabetes. The distance between nerve fibres and mast cells was about 1 mm and very often less than 200 nm. In some instances, the mast cells were degranulated in the vicinity to nerve fibres. Increased number of mast cell nerve contacts in neurogenic inflammation might cause vasoconstriction and lesions of the oral mucosa, so some disorders such lichen planus, leukoplakia and cancer might frequently develop in diabetes mellitus.
3 July 2016 in Australian Journal of Earth Sciences
Environmental, engineering and industrial modelling of natural features (e.g. trees) and man-made features (e.g. pipelines) requires some form of fitting of geometrical objects such as cylinders, which is commonly undertaken using a least-squares method that—in order to get optimal estimation—assumes normal Gaussian distribution. In the presence of outliers, however, this assumption is violated leading to a Gaussian mixture distribution. This study proposes a robust parameter estimation method, which is an improved and extended form of vector algebraic modelling. The proposed method employs expectation maximisation and maximum likelihood estimation (MLE) to find cylindrical parameters in case of Gaussian mixture distribution. MLE computes the model parameters assuming that the distribution of model errors is a Gaussian mixture corresponding to inlier and outlier points. The parameters of the Gaussian mixture distribution and the membership functions of the inliers and outliers are computed using an expectation maximisation algorithm from the histogram of the model error distribution, and the initial guess values for the model parameters are obtained using total least squares. The method, illustrated by a practical example from a terrestrial laser scanning point cloud, is novel in that it is algebraic (i.e. provides a non-iterative solution to the global maximisation problem of the likelihood function), is practically useful for any type of error distribution model and is capable of separating points of interest and outliers.
15 June 2016 in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Web-based photo albums that support organizing and viewing the users’ images are widely used. These services provide a convenient solution for storing, editing and sharing images. In many cases, the users attach geotags to the images in order to enable using them e.g. in location based applications on social networks. Our paper discusses a procedure that collects open access images from a site frequently visited by tourists. Geotagged pictures showing the image of a sight or tourist attraction are selected and processed in photogrammetric processing software that produces the 3D model of the captured object. For the particular investigation we selected three attractions in Budapest. To assess the geometrical accuracy, we used laser scanner and DSLR as well as smart phone photography to derive reference values to enable verifying the spatial model obtained from the web-album images. The investigation shows how detailed and accurate models could be derived applying photogrammetric processing software, simply by using images of the community, without visiting the site.
1 September 2017 in Production Engineering Archives
18 April 2022 in IEEE Access
Digital twins of road surfaces support multiple engineering applications. Remote sensing technologies provide information from the entire surface of the pavement by high accuracy point clouds. Pavement errors and differences from designed geometry can be detected and assessed using such datasets, while OpenCRG models derived from point clouds support transportation applications. High-resolution CRG (Curved Regular Grid) models enable analyzing vehicle suspension systems in vehicle dynamics simulation environments. Furthermore, such models also support creating the digital twins of vehicle suspensions and improve the development and research of models related to vehicle dynamics. The paper presents how the suspension digital twin was obtained applying a genetic algorithm and how it was assessed. The quality of raw data and that of the derived methods are analyzed in the case of multiple mapping technologies (terrestrial, mobile, and aerial laser scanning). CRG models were created from all datasets, and their applicability was investigated to support vehicle simulations with high accuracy demand. Other important vehicle-related use cases are also mentioned in the paper.