1 January 2015 in Journal of Power Sources
9 January 2017 in ACS Applied Materials & Interfaces
23 January 2015 in Journal of the Electrochemical Society
The solvent-free hybrid solid electrolytes composed of lithium aluminum germanium phosphate (LAGP) and poly(ethylene oxide) (PEO) were prepared in the form of flexible film, and their electrochemical characteristics were investigated. The addition of ion-conductive LAGP powder into PEO-based solid polymer electrolyte improved the electrical and mechanical properties of solid electrolytes. For the hybrid solid electrolytes examined in this study, the optimum composition of LAGP was found to be about 60∼80 wt% in consideration of ionic conductivity, mechanical stability and formability for flexible thin film. The all solid-state Li/LiFePO4 cell assembled with hybrid solid electrolyte delivered an initial discharge capacity of 137.6 mAh g−1 and exhibited good cycling stability at 55°C.
1 February 2021 in Advanced Science
Mild‐acid Zn‐MnO2 batteries have been considered a promising alternative to Li‐ion batteries for large scale energy storage systems because of their high safety. There have been remarkable improvements in the electrochemical performance of Zn‐MnO2 batteries, although the reaction mechanism of the MnO2 cathode is not fully understood and still remains controversial. Herein, the reversible dissolution/deposition (Mn2+/Mn4+) mechanism of the MnO2 cathode through a 2e− reaction is directly evidenced using solution‐based analyses, including electron spin resonance spectroscopy and the designed electrochemical experiments. Solid MnO2 (Mn4+) is reduced into Mn2+ (aq) dissolved in the electrolyte during discharge. Mn2+ ions are then deposited on the cathode surface in the form of the mixture of the poorly crystalline Zn‐containing MnO2 compounds through two‐step reactions during charge. Moreover, the failure mechanism of mild‐acid Zn‐MnO2 batteries is elucidated in terms of the loss of electrochemically active Mn2+. In this regard, a porous carbon interlayer is introduced to entrap the dissolved Mn2+ ions. The carbon interlayer suppresses the loss of Mn2+ during cycling, resulting in the excellent electrochemical performance of pouch‐type Zn‐MnO2 cells, such as negligible capacity fading over 100 cycles. These findings provide fundamental insights into strategies to improve the electrochemical performance of aqueous Zn‐MnO2 batteries.
4 January 2021 in Nature Communications
The realisation of fast-charging lithium-ion batteries with long cycle lifetimes is hindered by the uncontrollable plating of metallic Li on the graphite anode during high-rate charging. Here we report that surface engineering of graphite with a cooperative biphasic MoOx–MoPx promoter improves the charging rate and suppresses Li plating without compromising energy density. We design and synthesise MoOx–MoPx/graphite via controllable and scalable surface engineering, i.e., the deposition of a MoOx nanolayer on the graphite surface, followed by vapour-induced partial phase transformation of MoOx to MoPx. A variety of analytical studies combined with thermodynamic calculations demonstrate that MoOx effectively mitigates the formation of resistive films on the graphite surface, while MoPx hosts Li+ at relatively high potentials via a fast intercalation reaction and plays a dominant role in lowering the Li+ adsorption energy. The MoOx–MoPx/graphite anode exhibits a fast-charging capability (<10 min charging for 80% of the capacity) and stable cycling performance without any signs of Li plating over 300 cycles when coupled with a LiNi0.6Co0.2Mn0.2O2 cathode. Thus, the developed approach paves the way to the design of advanced anode materials for fast-charging Li-ion batteries.
18 April 2018 in Advanced Functional Materials