20 September 2024 in ACS Applied Materials & Interfaces
27 May 2025 in ACS Applied Nano Materials
21 August 2026 in SSRN Electronic Journal
Polarization-sensitive photodetection is particularly interesting due to its significant applications. In this study, a self-powered polarization-sensitive photodetector featuring a geometrically asymmetric Te/MoS2 heterostructure was developed. The self-powering capability of this device is attributed to the geometric asymmetry of the Te channel. When illuminated by a 405 nm laser with a light power density of 10 mW/cm2, the device demonstrated an impressive responsivity detectivity (D*) of 2.12 × 1010 Jones and an external quantum efficiency (EQE) reaching 72.9%. The narrow bandgap characteristic of Te extends the spectral detection range from the visible light (405 nm) to the infrared region (1550 nm). Furthermore, the anisotropic crystal structure of the Te nanoflake endows our device with exceptional capabilities for detecting polarized light. When illuminated by a 1310 nm laser, the photocurrent anisotropic ratio (PR) achieves up to 5.35, surpassing previously reported polarization-sensitive photodetectors. This advancement has facilitated the application for AS-Te/MoS2 devices in high-resolution single-pixel polarization imaging. Finally, through synergistic modulation of both light switch and polarization angle variation, we successfully implemented a three-value optoelectronic logic gate within this device. This work presents an effective approach by combining geometrically asymmetric conduction channels with heterostructures, thereby paving new avenues for realizing self-powered polarization-sensitive photodetectors.
26 September 2026 in Applied Surface Science
27 March 2026 in SSRN Electronic Journal
Self-doping with Ti3+ ions and oxygen vacancies (OVs) has emerged as effective strategy to overcome the limitations of TiO2: its wide bandgap and rapid recombination of photogenerated charge carriers. Nevertheless, the controllable methods for tuning the self-doping concentration are still lacking. Moreover, a deeper mechanistic understanding of how OVs modulate charge transport, surface reactivity, and defect-mediated catalytic pathways is still limited. In this study, OVs and Ti3+ ions were introduced into TiO2 (R-TiO2) electrode via electrochemical doping method. The doping concentration can be readily tuned by adjusting the applied reduction potential and duration. The underlying electrochemical doping mechanism was elucidated by coupling cyclic voltammetry with Raman spectroscopy. The effects of Ti3+ and OVs on the photoelectrochemical properties of TiO2 were investigated through an integrated theoretical and experimental framework. The resultant R-TiO2 photoelectrode exhibited significantly enhanced activity, which is 3.8-fold that of pristine TiO2. Furthermore, the R-TiO2 photoelectrode demonstrated exceptional stability and structural integrity over 30 h of PEC operation. DFT calculations revealed that H2O molecules preferentially adsorb on the R-TiO2 (101) surface and undergo facile dissociation compared with pristine TiO2. Critically, the negative Gibbs free energy for H2O dissociation on the R-TiO2 (101) surface underpins the enhanced reaction activity.
26 July 2026 in SSRN Electronic Journal
This study reports the development of a highly sensitive electrochemical immunosensor based on gold nanoflowers (AuNFs) for the selective detection of carcinoembryonic antigen (CEA). The AuNFs were homogeneously synthesized on the screen-printed carbon electrode (SPCE) via optimized electrochemical deposition method. Sensor fabrication involved the formation of Au–S bonds to immobilize a self-assembled monolayer (SAM) on the AuNFs, followed by conjugating of the carboxyl groups of the SAM with the amino groups of anti-CEA antibodies. This design enabled specific binding between the antibodies and CEA antigens, thereby completing the sensor assembly. The immunosensor demonstrated a wide linear detection range over a CEA concentration range (0.1 to 100000 pg/mL) and a low limit of detection (LOD, 0.069 fg/mL). Furthermore, the immunosensor exhibits noteworthy storage stability, highly selectivity, and reproducibility, thus making it well-suited for the quantification of CEA in biological specimens. The properties described herein serve to substantiate the hypothesis that the AuNFs-based immunosensor is a promising candidate high-sensitivity POCT tumor biomarker sensors, and exhibits promising application prospects in early clinical cancer screening and real-time postoperative tumor monitoring.