1 February 2022 in Applied Mathematics and Computation
5 July 2023 in Transactions of the Institute of Measurement and Control
The control goal of the vehicle platoon is to maintain the same speed and desired distance. Most current studies are based on simplified vehicle models, and the leader’s state is also rarely considered. However, under complex working conditions, such as low adhesion or curves, the lateral stability of the platoon will be difficult to guarantee, and tracking errors of desired speed and spacing may further increase. To solve the above problems, a new hierarchical coordinated control strategy is proposed. Taking distributed drive electric vehicles (DDEVs) as research objects, the upper control level establishes a stability situation assessment model according to the vehicle’s dynamic characteristics. At the medium control level, variable weight model predictive control (MPC) coordinates conflicts between longitudinal tracking and lateral stability. A correction term is also introduced to revise the prediction model. At the same time, the weight of different control objectives of the leader and following vehicle was adjusted, respectively. Torque distribution is carried out at the lower level controller. Finally, the control strategy is tested on a hardware-in-the-loop (HIL) platform. The results show that the proposed control strategy can ensure lateral stability while improving the tracking performance of the vehicle platoon.
14 August 2024 in Measurement
28 August 2024 in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
Distributed drive electric vehicles can reduce range anxiety through regenerative braking. However, if the wheel motor torque output fails, it will form an additional yaw moment to the vehicle, causing instability, or deviation and threatening its safety. To solve this problem, the research object is an electric vehicle driven by a four-wheel hub motor. A braking force compensation distribution strategy for front and rear axles is proposed, which combines electronic hydraulic braking (EHB) system compensation control and deviation auxiliary control. Firstly, a fault detection module is established, and the motor’s output torque is estimated by designing a torque observer to obtain the fault degree information of the motor. Secondly, to fully use the motor’s regenerative braking force, the fault-free and faulty electro-hydraulic braking force distribution strategies are designed in the coordinated distribution layer of the electro-hydraulic braking system. The corresponding electro-hydraulic braking force compensation method is selected according to the fault degree of the regenerative braking function, the position of the faulty wheel, and the braking strength. Then, a deviation auxiliary controller is designed based on the model predictive control, and the intervention time of the auxiliary controller is determined according to the vehicle’s state. Finally, the control method is verified based on CarSim/Simulink co-simulation and hardware-in-the-loop (HIL) platform. The test results show that the designed control method can effectively compensate for the regenerative braking failure of random wheel and ensure the braking safety of the vehicle.
27 March 2013 in Microwave and Optical Technology Letters
9 August 2025 in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
Preceding vehicles are easily lost due to the limited view of onboard sensors on roads with large curvature, resulting in the functional failure of the environmental perception system. This makes intelligent vehicles unable to obtain reliable information to make reasonable decisions, threatening the safety of car-following. Therefore, this paper proposes a method to improve car-following safety on blind curved roads. By analyzing the cautious mindset of drivers during cornering, an improved Markov model based on long-term prediction decay is proposed, combined with a Long Short-Term Memory (LSTM) model, to effectively predict the state of the preceding vehicle and address the intended functional safety issues arising from sensor functional failures. Subsequently, different strategies are designed for various states of the preceding vehicle, such as acceleration and deceleration, and a sensor field-of-view distance model is established to provide effective distance parameters for vehicle control. Notably, the proposed strategy has undergone rigorous simulation and hardware-in-the-loop (HiL) tests, proving its effectiveness in improving car-following safety on large curvature curves and instilling confidence in its potential.