Indium gallium zinc oxide deposited by pulsed laser deposition at room temperature was used as a channel layer to fabricate transparent thin film transistors with good electrical characteristics: field effect mobility of and subthreshold voltage swing of . By varying the oxygen partial pressure during deposition the conductivity of the channel was controlled to give a low off-current of and a drain current on/off ratio of . Changing the channel layer thickness was a viable way to vary the threshold voltage. The effect of the gate dielectric on the electrical behavior was also explored.
Optics InfoBase is the Optical Society's online library for flagship journals, partnered and copublished journals, and recent proceedings from OSA conferences.
Periodic arrays of apertures with subwavelength dimensions and submicron periodicity were fabricated on gold-coated tips of silica optical fibers using focused ion beam (FIB) milling. Interaction of light with subwavelength structures such as an array of nanoapertures in an optically thick metallic film leads to the excitation of surface plasmon waves at the interfaces of the metallic film and the surrounding media, thereby leading to a significant enhancement of light at certain wavelengths. The spectral position and magnitude of the peaks in the transmission spectra depend on the refractive index of the media surrounding metallic film containing the nanohole array. This lays the foundation for the development of fiber-optic chemical and biological sensors that sense the change in refractive index of the medium around the metallic film. This is demonstrated by testing the sensors with solutions of alcohols with different refractive indices and by the attachment of biomolecules to the sensor surface. The bulk refractive index sensitivity of these nanoaperture array-based sensors is shown to be higher than what has been typically reported for metallic nanoparticle-based plasmonic sensors.