25 September 2015 in Journal of Materials Chemistry A
A comprehensive and critical analysis on the use of metal–organic frameworks for the adsorption and photocatalytic degradation of organics in water, as well as H2production.
1 March 2019 in Applied Catalysis B: Environment and Energy
19 August 2019 in Journal of Materials Chemistry A
We report a defect-engineering approach to modulate the band gap of zirconium-based metal–organic framework UiO-66, enabled by grafting of a range of amino-functionalised benzoic acids at defective sites. Defect engineered MOFs were obtained by both post-synthetic exchange and modulated synthesis, featuring band gap in the 4.1–3.3 eV range. First principle calculations suggest that shrinking of the band gap is likely due to an upward shift of the valence band energy, as a result of the presence of light-absorbing monocarboxylates. The photocatalytic properties of defect-engineered MOFs towards CO2 reduction to CO in the gas phase and degradation of Rhodamine B in water were tested, observing improved activity in both cases, in comparison to a defective UiO-66 bearing formic acid as the defect-compensating species.
23 September 2019 in Molecular Systems Design & Engineering
Metal–organic frameworks (MOFs) have taken the materials science world by storm, with potentials of near infinite possibilities and the panacea for adsorption-based carbon capture. Yet, no pilot-scale (or larger-scale) study exists on MOFs for carbon capture. Beyond material scalability issues, this clear gap between the scientific and engineering literature relates to the absence of suitable and accessible assessment of MOFs in an adsorption process. Here, we have developed a simple adsorbent screening tool with process economics to evaluate adsorbents for post-combustion capture, while also considering factors relevant to industry. Specifically, we have assessed the 25 adsorbents (22 MOFs, 2 zeolites, 1 activated carbon) against performance constraints – i.e. CO2 purity and recovery – and cost. We have considered four different CO2 capture scenarios to represent a range of CO2 inlet concentrations. The cost is compared to that of amine-based solvents for which a corresponding model was developed. Using the model developed, we have conceptually assessed the materials properties and process parameters influencing the purity, recovery and cost in order to design the ‘best’ adsorbent. We have also set-up a tool for readers to screen their own adsorbent. In this contribution, we show that minimal N2 adsorption and moderate enthalpies of adsorption are key in obtaining good process performance and reducing cost. This stands in contrast to the popular approaches of maximizing CO2 capacity or surface area. Of the 22 MOFs evaluated, UTSA-16 shows the best performance and lowest cost for post-combustion capture, having performance in-line with the benchmark, i.e. zeolite 13X. Mg-MOF-74 performs poorly. The cost of using the adsorbents remains overall higher than that of an amine-based absorption process. Ultimately, this study provides specific directions for material scientists to design adsorbents and assess their performance at the process scale. This works intends to bridge the gap between scientific and engineering studies to accelerate CO2 capture adsorbents development. The approach can be extended to other molecular separations.
18 September 2017 in ACS Nano
Production of biocompatible and stable porous materials, e.g. boron nitride, exhibiting tunable and enhanced porosity is a prerequisite if they are to be employed to address challenges such as drug delivery, molecular separations or catalysis. However, there is currently very limited understanding of the formation mechanisms of porous boron nitride and the parameters controlling its porosity, which ultimately prevents exploiting the materials’ full potential. Herein, we produce boron nitride with high and tunable surface area and micro/mesoporosity via a facile template-free method using multiple readily available N-containing precursors with different thermal decomposition patterns. The gases are gradually released, creating hierarchical pores, high surface areas (> 1900 m2/g) and micropore volumes. We use 3D tomography techniques to reconstruct the pore structure, allowing direct visualization of the mesopore network. Additional imaging and analytical tools are employed to characterize the materials from the micro- down to the nano-scale. The CO2 uptake of the materials rivals or surpasses those of commercial benchmarks or other boron nitride materials reported to date (up to four times higher), even after pelletizing. Overall, the approach provides a scalable route to porous boron nitride production as well as fundamental insights into the material’s formation, which can be used to design a variety of boron nitride structures.
4 March 2016 in Catalysis Science & Technology
Heterogeneous photocatalysis plays a key role in the implementation of novel sustainable technologies, e.g. CO2 conversion into fuel, H2 production from water or organics degradation. The progress of photocatalysis relies on the development of tuneable photocatalysts and particularly the ability to build nanocomposites exhibiting synergistic properties with reduced electron–hole recombination rates. We report for the first time the in situ synthesis of nanocomposites of carbon nitride nanosheets (CNNSs) and metal–organic frameworks (MOFs) for application as photocatalysts. This approach leads to the ‘nano-scale mixing’ of the components, thereby enabling a greater performance compared to other types of 2D materials/MOF composites typically obtained via physical mixing. The objective is to take advantage of the complementary features of the materials while forming a heterojunction. The structural, chemical, photophysical and electrochemical properties of the nanocomposites are characterized and compared to those of the parent materials and their physical mixture. The nanocomposites retain the high specific surface area and strong visible light absorbance of MIL-100(Fe). The intimate contact between the CNNSs and the MOF particles is found to promote the electron–hole separation significantly due to the formation of a heterojunction. Hence, more efficient photocatalytic dye degradation is achieved over the composites than the physical mixture.