19 September 2013 in Bulletin of Earthquake Engineering
8 November 2013 in Bulletin of Earthquake Engineering
17 January 2012 in Earthquake Engineering & Structural Dynamics
4 May 2021 in Architectural Science Review
The design of supertall buildings (300m+) involves many professionals from several disciplines. The need for coordination among numerous experts, increases complexity of the entire process, which is typically conducted under the leadership of the architect, or sometimes the contractor. Consequently, the architects designing supertall buildings must be aware of architectural and structural design considerations and their interrelations. In this paper, the main architectural design considerations and structural system details of supertall buildings are studied; these include 93 completed or under construction buildings from the 1980s onwards. This study analyses the contemporary trends in main architectural and structural design considerations and corresponding interrelations. In addition, more inclusive and consistent classifications of structural system, building form, and core planning are proposed. The comparison between design considerations over the new proposed classifications is intended to aid and direct architects in the planning and development of supertall building projects as a basic guideline.
14 May 2008 in Journal of Earthquake Engineering
In this study, seismic safety of low–rise and mid–rise structures, which constitute approximately 75% of the total building stock in Turkey, is investigated by generating fragility curves. The scope is 3, 5, 7, and 9–story reinforced concrete moment resisting frame structures. The uncertainties in material variability and the specific characteristics of construction practice in Turkey are taken into account in the formation of structural simulations. Two-dimensional analytical models are constructed accordingly and categorized as poor, typical, or superior corresponding to the observed seismic performance of structures after major earthquakes in Turkey. The seismic demand statistics in terms of maximum interstory drift ratio are obtained for different sets of ground motion records by performing nonlinear time history analyses. The capacity is determined in terms of limit states and the corresponding fragility curves are obtained from the probability of reaching or exceeding each limit state for different levels of ground shaking. The generated fragility curves are employed in a preliminary evaluation application. For this purpose, Fatih, a highly populated earthquake–prone district in Istanbul, is selected. This study attempts to be a benchmark for future fragility based studies on earthquake damage and loss estimation in urban areas of Turkey.
16 October 2013 in Earthquake Engineering & Structural Dynamics