We report on the development of a pulsed neodymium-doped yttrium aluminum garnet (Nd:YAG) laser operating at a 1116 nm wavelength. Because the third harmonic is within a few gigahertz of the 372 nm absorption line of iron, this laser system represents an alternative to alexandrite lasers commonly used in iron fluorescence lidars. With our prototype, we achieved a 0.5 W at 372 nm wavelength and a 100 Hz pulse repetition frequency. As a proof of concept, we show iron density measurements, which have been acquired using the novel lidar transmitter.
Optics InfoBase is the Optical Society's online library for flagship journals, partnered and copublished journals, and recent proceedings from OSA conferences.
High efficiency and high power laser operation of highly-doped 2at.% crystalline Nd:YAG at 1.3microm is demonstrated in a diode-side pumped bounce amplifier configuration. A linearly polarized output power of 16.7W is obtained representing the highest power at 1.3microm achieved to date, to our knowledge, in a highly doped crystalline Nd:YAG laser. The system could deliver over 9W average output power in Q-switched operation with repetition rates from 20 - 160kHz. With quasi-continuous wave diode pumping 5.5mJ pulses at 100Hz repetition rate were achieved as well as 50ns pulses in Q-switched operation.
High power operation of high repetition Q-switched ceramic Nd:YAG laser is demonstrated using a master-oscillator power amplifier with transversely-pumped bounce geometry. The laser system produced >40W high spatial quality output (M2 < 1.3) at a pulse repetition frequency of >100kHz. Pulse width of 35–80ns was achieved in pulse repetition frequency range of 10–150kHz.
We present a side-respectively end-pumped Nd:YAG laser system at a laser wavelength of 1116 nm. The third harmonic of this wavelength at 372 nm can be used for LIDAR detection of molecular iron in the middle atmosphere at the height of about 70 to 120 km. Such measurements give information about temperature profiles and wind speeds in this atmospheric region and thus help in validating and calibrating global circulation models [1, 2].