This study presents a detailed characterization of the inherent variability of a silty gold tailings deposit on the basis of piezocone penetration test (CPTu) data. The database originates from a comprehensive site investigation campaign and was processed via a layer separation algorithm to identify strata and determine relevant statistical parameters. Profiles were classified considering granular (drained), intermediate (partially drained), and fine (undrained) material behavior, allowing for behavior-specific probabilistic analysis of cone resistance (qc), sleeve friction (fs), and pore pressure (u2). The results revealed greater measurement variability for qc, fs, and u2 in coarse-grained materials, whereas the strength parameters—particularly the undrained shear strength (Su)—exhibit greater variability in fine-grained materials. The classification approach also enabled a consistent estimation of the scale of fluctuation, an essential parameter for spatial variability modeling. A complementary numerical analysis illustrated the influence of inherent variability on the normalized cone resistance (qc/qcUD) under different drainage conditions. Greater dispersion occurred at lower velocities, which is characteristic of drained behavior. The alignment between the theoretical bounds and field data supports the robustness of the methodology, providing a valuable framework for reliability-based geotechnical design.
This study presents the application of a piezoball penetrometer equipped with pore pressure transducers at the tip, mid-face, and equator positions to characterize the undrained shear strength and consolidation behavior of a soft clay deposit in southern Brazil. Two piezoball tests were performed with cyclic and dissipation measurements, alongside piezocone, field vane, and laboratory tests. Undrained strength estimates based on penetration resistance aligned well with piezocone and vane test results, using an average bearing factor aligned with international practice. Remolded strength revealed sensitivity to the time interval between penetration and extraction readings, with longer delays leading to overestimation. Dissipation tests showed contractive pore pressure behavior, and consolidation coefficients derived from normalized curves at the equator sensor position were closest to piezoconebased values. The study provides practical recommendations for piezoball testing and highlights the importance of time control during cyclic measurements, reinforcing the importance of expanding robust geotechnical databases to support future applications.
1 January 2026 in REM - International Engineering Journal
Geotechnical properties vary spatially owing to their mineralogical composition, stress history, and deposition processes, even within homogeneous soil layers. This high degree of variability imposes considerable limitations on the calculation and simulation of models based on deterministic parameters extracted from the field. Mine tailings exemplify this scenario, where the difficulty of sample extraction and laboratory characterization further complicates the challenges. Consequently, field investigation becomes a crucial factor in determining the behavior to be used in geomechanical models. To address this issue, this study focuses on quantifying statistical parameters, including the mean, standard deviation, probability density function, and fluctuation scale-scarce in the literature-derived from direct measurements of piezocone tests and related strength parameters. The results indicate that despite the high variability of the deposit, after a careful profile evaluation considering the characteristic behavior of coarse and fine materials, it was feasible to evaluate the adherence of both normal and lognormal distributions for strength parameters. The fluctuation scales also show high dispersion, ranging from 0.1 to 3.3 meters. This research contributes to a comprehensive understanding of the spatial variability in mine tailings and provides practical insights for future applications.