Tunneling work, including the construction of municipal tunnels and metro lines, may disturb the structural health of aging buildings in densely built urban areas. Deformation monitoring and risk assessments of aging buildings are crucial to mitigate incidents and prevent losses of people’s lives and properties. Time-series InSAR reveals spatio-temporal information about observed targets by extracting persistent scatterers of the structures, which can achieve the wide-range monitoring of buildings and infrastructure. However, solely relying on InSAR-derived general parameters (deformation rates and time series of specific points) cannot objectively assess the safety conditions of buildings. To address this issue, this study proposes an InSAR Nonuniform Settlement Index. First, the point targets of buildings are extracted through time-series InSAR processing. Then, using the points as inputs, the Nonuniform Settlement Index calculates the 3D settlement plane and the inclination angle of the plane corresponding to each building. In this way, the proposed Nonuniform Settlement Index acts as a subsequent analysis method of time-series InSAR to characterize the safety statuses of buildings. In our study, 147 scenes of COSMO-SkyMed images from 2013 to 2022 were used to inverse the nine-year deformation evolution of the tested area. After time-series InSAR processing and index analysis based on the above SAR datasets, cross-validation was implemented with static-level and manual investigation data. The approach was to use one aging, collapsed building affected by tunneling work, as well as the eight adjacent aging buildings. The results showed high consistency with the in situ data, which proves the efficiency of the proposed approach.
Impact-damaged reinforced concrete (RC) columns often experience significant reductions in load-carrying capacity and ductility when subjected to subsequent axial loading. Carbon fiber-reinforced polymer (CFRP) sheets have been widely used to strengthen such damaged columns; however, the underlying strengthening mechanism remains insufficiently understood, largely due to the difficulty of experimentally capturing the evolution of internal damage. To address this issue, a three-dimensional (3D) meso-scale finite element (FE) model has been developed to investigate the mechanical behavior of CFRP-strengthened impact-damaged RC columns. The proposed model captures the evolution of micro-damage within concrete and provides a more realistic representation of impact-induced damage compared with conventional homogeneous models. The model was first validated against available experimental results, showing good agreement in both failure modes and responses. Based on the validated model, three typical strengthening schemes, including the longitudinally applied CFRP, U-shaped CFRP, and fully wrapped CFRP, are systematically examined in terms of failure patterns, load-carrying capacity, stiffness, ductility, and energy dissipation. The results indicate that the fully wrapped CFRP configuration most effectively mitigated damage in the impact-affected zone and increased the load-carrying capacity by up to 86%. Furthermore, a quantitative evaluation framework based on strengthening indices for axial capacity and energy dissipation is proposed, indicating that strengthening with two CFRP layers can lead to a desirable ductile failure mode within the scope of this numerical investigation. These findings provide useful mechanistic insights into the strengthening process and offer preliminary guidance for the rehabilitation of impact-damaged RC columns, though further validation is required before practical implementation.