5 March 2014 in AAPS PharmSciTech
The objectives of the present work were to use blends of Eudragit L and hydroxypropyl methylcellulose acetate succinate (HPMCAS) as enteric film coatings for lansoprazole (LSP) pellets. The...
1 November 2010 in Journal of Semiconductors
The influence of voltage on photo-electrochemical etching (PEC) of macroporous silicon arrays (MSA) was researched. According to the theory of the space charge region, I—V scan curves and the reaction mechanism of the n-type silicon anodic oxidation in HF solution under different current densities, the pore morphology influenced by the working voltage were studied and analyzed in detail. The results show that increasing the etching voltage will lead to distortion of the pore morphology, decreasing etching voltage will result in an increase in the blind porosity, and the constant etching voltage for a long time will cause gradual bifurcation. Through the optimization of the process parameters, the perfect MSA structure with a pore depth of 317 μm, a pore size of 3 μm and an aspect ratio of 105 was obtained.
1 August 2023 in Materials Research Express
AZO(ZnO/Al2O3) conductive films were deposited in the microchannel of microchannel plate (MCP) by atomic layer deposition (ALD). The prepared films were characterized, including analysis of the thickness and composition uniformity of AZO films. The MCP bulk resistance was also measured, and the effect of annealing treatment on bulk resistance was investigated. The results suggest that the use of trimethylaluminum in the preparation of AZO composite film within the microchannel of MCP leads to corrosion of ZnO, resulting in non-uniformity in film thickness and incorrect composition of the film. The problem was resolved by increasing the pulse time of trimethylaluminum to 500 ms, resulting in the successful preparation of an AZO film with a uniform thickness and composition in the microchannel. After annealing, the bulk resistance of MCP increases while the variation of bulk resistance with voltage decreases. Specifically, the bulk resistance of the MCP having a ZnO/Al2O3 ratio of 7/2 only experiences changes of the same order of magnitude (∼108 Ω) after undergoing a 60-minute annealing process in N2 at 300 °C, thus satisfying the requirements of MCP.