25 July 2022 in Journal of Lightwave Technology
A compact fiber optic hydrogen sensing system employing self-referenced configuration and controllable light heating technologies, is proposed and experimentally demonstrated with ultra-high sensitivity and wide dynamic range of hydrogen concentration detection. This sensing probe, consisting of nano WO 3 -Pd 2 Pt-Pt composite films and single mode fiber inscribed with two Bragg gratings, is principally based on the gasochromic effect of sensitive films. Signal-to-noise ratio of this system can be significantly enhanced with peak intensity of high reflective fiber Bragg grating (I 1 , FBG1 written in flat wavelength range of light source) and background intensity (I 2 , at a spectral distance of 1nm on the red side of FBG1) as reference intensity and sensing intensity respectively. A 980 nm laser and proportion integration differentiation (PID) controller were employed to ensure the hydrogen sensitive film working at an optimized temperature of 80 °C. Hydrogen concentration detection from 0.5 to 12000 ppm in air was achieved by utilizing this sensing system. Experimental results demonstrate the resolution of this hydrogen sensing system can reach 0.2 ppm within range of 1 to 1000 ppm hydrogen exposure. Moreover, this sensor can present a quick response time of less than one second towards 4000 ppm hydrogen in air. Furthermore, the stability of this sensor can be greatly enhanced with controllable optical heating system. The approach proposed in this work can greatly improve the performance of hydrogen sensor, which is very beneficial to its potential application in hydrogen-related facilities.
14 November 2022 in IEEE Sensors Journal
Pd-based alloy coating on optical fiber is widely employed for hydrogen concentration sensing. However, it is difficult to distinguish the Pd-based alloy expansion from hydrogen-adsorption or thermal-effect. In this paper, a novel fiber-optic hydrogen sensor based on π-shifted FBG with locally coated Pd/Ta alloy layer, which enables an in-situ temperature compensation, is proposed and experimentally demonstrated. The hydrogen sensitivity difference between the extremely narrow peak of π-shifted FBG and the sidelobe wavelength are employed to realize the hydrogen concentration detection with temperature compensation. Theoretical simulation and experiment show that the hydrogen sensitivity of the structure can be enhanced by optimizing the partially-coating length. When the alloy length is 2 mm for a 10 mm-grating, the wavelength shifts of central and sidelobe 19.2 pm and 6.0 pm are achieved respectively at 1% hydrogen concentration. Maximum hydrogen sensitivity after temperature compensation of 13.2 pm is obtained. The proposed local-compensated method based on partially-coating on π-shifted FBG is particularly potential for oxygen-free environments with high requirement on hydrogen accuracy.