13 December 2020 in Journal of Natural Fibers
Natural fiber is a resource that is found abundantly and cost effective. It is decomposed easily and biodegradable. Natural fibers have a vital place in the industry and have the capability of replacing carbon fibers and conventional glass because of their biodegradability and eco-friendly characteristics. They have significant chemical, mechanical, and physical properties, which vary according to cellulose content in the fiber. Usually, with the increase in the cellulose content, the tensile strength of the fiber increases and with the increase in the non-cellulose content, the tensile strength of the fiber decreases. However, these chemical constituents are not the only factors that determine the tensile strength of the fiber. Certain other factors such as fiber age, maturity, location, and processing methods along with the source of the fiber also influence the tensile strength of the fiber. These properties of the natural fibers make it a vital component in engineering applications. Natural fibers meet the needs of humans and the manufacturing industry with their positive environmental effect and economic outlook. This review provides basic information and a segregated study on the mechanical properties of natural fibers, thus creating opportunities for future research and studies related to natural fiber–reinforced composites.
7 October 2021 in International Endodontic Journal
20 August 2022 in Physica B: Condensed Matter
19 October 2017 in Journal of Reinforced Plastics and Composites
The role of lignite fly ash in determining the physical properties of polymer matrix composite is studied in the present investigation. For that, different compositions of polymer matrix composite were prepared using epoxy polymer resin with lignite fly ash and jute fiber in the combination of (90 − x) EP − 10 JF − xLFA (where x = 0, 0.5, 1, 1.5, 2, and 2.5 wt.%) through hand layup technique followed by light compression molding technique. The changes in the physical properties of polymer matrix composite, when fly ash was added, were found to be quite interesting. A linear increase in mechanical strength such as compressive strength, tensile strength, flexural strength, impact energy, and barcol hardness was observed up to the addition of 2 wt.% fly ash content in the polymer matrix composite. Scanning electron microscope image of the composite sample EPJF2.0 showed the distribution of the fly ash, minimal voids, and fiber pullouts presented at the fractured surface. Of all the prepared polymer matrix composites, the sample EPJF2.0 showed a higher mechanical strength and better thermal stability than the other samples.
1 June 2010 in Journal of Non-Crystalline Solids
12 January 2023 in International Endodontic Journal