1 May 2012 in The Journal of the Acoustical Society of America
An automated procedure has been developed for detecting and localizing frequency-modulated bowhead whale sounds in the presence of seismic airgun surveys. The procedure was applied to four years of data, collected from over 30 directional autonomous recording packages deployed over a 280 km span of continental shelf in the Alaskan Beaufort Sea. The procedure has six sequential stages that begin by extracting 25-element feature vectors from spectrograms of potential call candidates. Two cascaded neural networks then classify some feature vectors as bowhead calls, and the procedure then matches calls between recorders to triangulate locations. To train the networks, manual analysts flagged 219 471 bowhead call examples from 2008 and 2009. Manual analyses were also used to identify 1.17 million transient signals that were not whale calls. The network output thresholds were adjusted to reject 20% of whale calls in the training data. Validation runs using 2007 and 2010 data found that the procedure missed 30%–40% of manually detected calls. Furthermore, 20%–40% of the sounds flagged as calls are not present in the manual analyses; however, these extra detections incorporate legitimate whale calls overlooked by human analysts. Both manual and automated methods produce similar spatial and temporal call distributions.
1 March 2020 in The Journal of the Acoustical Society of America
Over 500 000 automated and manual acoustic localizations, measured over seven years between 2008 and 2014, were used to examine how natural wind-driven noise and anthropogenic seismic airgun survey noise influence bowhead whale call densities (calls/km2/min) and source levels during their fall migration in the Alaskan Beaufort Sea. Noise masking effects, which confound measurements of behavioral changes, were removed using a modified point transect theory. The authors found that mean call densities generally rose with increasing continuous wind-driven noise levels. The occurrence of weak airgun pulse sounds also prompted an increase in call density equivalent to a 10–15 dB change in natural noise level, but call density then dropped substantially with increasing cumulative sound exposure level (cSEL) from received airgun pulses. At low in-band noise levels the mean source level of the acoustically-active population changed to nearly perfectly compensate for noise increases, but as noise levels increased further the mean source level failed to keep pace, reducing the population's communication space. An increase of >40 dB cSEL from seismic airgun activity led to an increase in source levels of just a few decibels. These results have implications for bowhead acoustic density estimation, and evaluations of the masking impacts of anthropogenic noise.
1 May 2009 in The Journal of the Acoustical Society of America
International audienceSperm whales have learned to depredate black cod ﰍAnoplopoma fimbriaﰀ from longline deployments in the Gulf of Alaska. On May 31, 2006, simultaneous acoustic and visual recordings were made of a depredation attempt by a sperm whale at 108 m depth. Because the whale was oriented perpendicularly to the camera as it contacted the longline at a known distance from the camera, the distance from the nose to the hinge of the jaw could be estimated. Allometric relationships obtained from whaling data and skeleton measurements could then be used to estimate both the spermaceti organ length and total length of the animal. An acoustic estimate of animal length was obtained by measuring the inter-pulse interval ﰍIPIﰀ of clicks detected from the animal and using empirical formulas to convert this interval into a length estimate. Two distinct IPIs were extracted from the clicks, one yielding a length estimate that matches the visually-derived length to within experimental error. However, acoustic estimates of spermaceti organ size, derived from standard sound production theories, are inconsistent with the visual estimates, and the derived size of the junk is smaller than that of the spermaceti organ, in contradiction with known anatomical relationships
1 November 2010 in The Journal of the Acoustical Society of America
Passive acoustic towed linear arrays are increasingly used to detect marine mammal sounds during mobile anthropogenic activities. However, these arrays cannot resolve between signals arriving from the port or starboard without vessel course changes or multiple cable deployments, and their performance is degraded by vessel self-noise and non-acoustic mechanical vibration. In principle acoustic vector sensors can resolve these directional ambiguities, as well as flag the presence of non-acoustic contamination, provided that the vibration-sensitive sensors can be successfully integrated into compact tow modules. Here a vector sensor module attached to the end of a 800 m towed array is used to detect and localize 1813 sperm whale “clicks” off the coast of Sitka, AK. Three methods were used to identify frequency regimes relatively free of non-acoustic noise contamination, and then the active intensity (propagating energy) of the signal was computed between 4–10 kHz along three orthogonal directions, providing unambiguous bearing estimates of two sperm whales over time. These bearing estimates are consistent with those obtained via conventional methods, but the standard deviations of the vector sensor bearing estimates are twice those of the conventionally-derived bearings. The resolved ambiguities of the bearings deduced from vessel course changes match the vector sensor predictions.
1 July 2012 in The Journal of the Acoustical Society of America
International audienceSperm whales have depredated black cod (Anoplopoma fimbria) from demersal longlines in the Gulf of Alaska for decades, but the behavior has recently spread in intensity and geographic cover- age. Over a three-year period 11 bioacoustic tags were attached to adult sperm whales off Southeast Alaska during both natural and depredation foraging conditions. Measurements of the animals' dive profiles and their acoustic behavior under both behavioral modes were examined for statisti- cally significant differences. Two rough categories of depredation are identified: "deep" and "shallow." "Deep depredating" whales consistently surface within 500 m of a hauling fishing ves- sel, have maximum dive depths greater than 200m, and display significantly different acoustic behavior than naturally foraging whales, with shorter inter-click intervals, occasional bouts of high "creak" rates, and fewer dives without creaks. "Shallow depredating" whales conduct dives that are much shorter, shallower, and more acoustically active than both the natural and deep depredating behaviors, with median creak rates three times that of natural levels. These results suggest that dep- redation efforts might be measured remotely with passive acoustic monitoring at close ranges
21 March 2015 in ICES Journal of Marine Science
Since 2003, a collaborative effort (SEASWAP) between fishers, scientists, and managers has researched how Alaskan sperm whales locate demersal longline fishing activity and then depredate sablefish from gear. Sperm whales constantly produce relatively low-frequency biosonar signals whenever foraging; therefore, over the past decade, passive acoustic monitoring (PAM) has become a basic tool, used for both measuring depredation activity and accelerating field tests of potential depredation countermeasures. This paper reviews and summarizes past published PAM research on SEASWAP, and then provides a detailed example of how PAM methods are currently being used to test countermeasures. The review covers two major research thrusts: (i) identifying acoustic outputs of fishing vessels that provide long-distance “cues” that attract whales to fishing activity; and (ii) validating whether distinctive “creak” sounds can be used to quantify and measure depredation rates, using both bioacoustic tags and statistical comparisons between visual and acoustic depredation estimates during federal sablefish surveys. The latter part of the paper then provides an example of how PAM is being used to study a particular potential countermeasure: an “acoustic decoy” which transmits fishing vessel acoustic cues to attract animals away from true fishing activity. The results of an initial 2011 field trial are presented to show how PAM was used to design the decoy signals and monitor the efficacy of the deployment. The ability of PAM to detect both whale presence and depredation behaviour has reduced the need to deploy researchers or other specialists on fishing cruises. Instead, volunteer fishers can deploy “user-friendly” acoustic recorders on their gear, greatly facilitating the testing of various deterrents, and providing the industry and regulators a convenient and unobtrusive tool for monitoring both the scale and long-term spread of this behaviour across the Alaskan fishery.