13 April 2018 in IEEE Sensors Journal
In this work, a low-cost contactless passive sensor is designed and manufactured. The structure consists of a short-circuited printed monopole antenna coupled to two split-ring resonators. The permittivity of the materials under test is characterized within a near-field link between the sensor and a contactless reader. Concretely, the reader has been implemented by using a broadband patch antenna. The sensing principle relies on the reader detection of the notch introduced by the resonators in the power reflected by the sensor. Specifically, when a sample is placed over the sensor, the change in its effective permittivity produces a frequency shift of the notch detected in the reflection coefficient of the reader. A complete equivalent circuit model of the whole system is proposed. Moreover, the results are corroborated through full-wave simulations. Finally, the whole system is manufactured and measured. It is shown that the system can reliably detect the permittivity of the materials placed over the sensor at a distance between the reader and the sensor equal to 9.52 mm.
20 July 2018 in IEEE Transactions on Antennas and Propagation
In this paper, a contactless RFID system formed by chipless tags based on the magneto-inductive wave (MIW) delay lines is proposed. In order to carry out the reading process, two reader probes have been designed, manufactured, and measured: the first one based on an axial to planar MIW transition and the second one based on a printed monopole. Moreover, a study is presented to verify the probe with better performance in terms of delay and losses when a tag is interrogated. By using the probe based on an axial to planar MIW transition, it is possible to transmit a pulse with a distance between tag and probe higher than 1 cm. Finally, two chipless tags are designed and manufactured to verify the performance of the proposed system. All the designed and manufactured elements are printed on a low-cost substrate (FR4). The manufactured 2 bit tags codify the 01 and 10 patterns. A good decodification of the time-domain response associated with the tags is achieved when using the proposed whole system.
7 September 2016 in IEEE Sensors Journal
A passive electromagnetic temperature sensor based on a magneto-inductive wave (MIW) delay line is presented. The working principle is the following: a reader sends a pulse in the time domain to the sensor, which produces a backscattered pulse whose amplitude depends on the temperature. The transductor element is a conventional thermistor, which is placed at the end of the MIW delay line. The system operates at 2.55 GHz and, thus, both the thermistor and the sensor are characterized at this frequency. In order to do that, a setup capable of controlling and measuring the temperature and the frequency or time responses is proposed. The fabricated sensor is measured at different temperatures obtaining good agreement with the simulations. The integrity of sensor response after heating is also proved. The proposed sensor is implemented in single-layer printed technology, resulting in a low-cost and low-complexity solution with reduced dimensions.