We report the use of ultra-sonic spray-coating under ambient conditions as a deposition technique for the fabrication of planar heterojunction CH3NH3PbI3−xClx perovskite solar cells. We make a first optimization of processing parameter space using this deposition technique, and explore the role of the temperature of the substrate during spray-casting, the volatility of the casting solvent and the post deposition anneal on determining the efficiency of the resultant solar cells. We find that maximum device efficiency is correlated with the creation of dense films having a surface coverage above 85%. When such films are incorporated into a solar cell device, power conversion efficiencies of up to 11% are realized. These results demonstrate that spray-coating can be used in the large-area, low-cost manufacture of high efficiency solution-processed perovskite solar cells.
Low-bandgap CH3NH3(PbxSn1–x)I3 (0 ≤ x ≤ 1) hybrid perovskites (e.g., ≈1.5–1.1 eV) demonstrating high surface coverage and superior optoelectronic properties are fabricated. State-of-the-art photovoltaic (PV) performance is reported with power conversion efficiencies approaching 10% in planar heterojunction architecture with small (100 cm2 V−1 s−1) intrinsic carrier mobilities.
The rapid pace of development for hybrid perovskite photovoltaics has recently resulted in promising figures of merit being obtained with regard to device stability. Rather than relying upon expensive barrier materials, realizing market‐competitive lifetimes is likely to require the development of intrinsically stable devices, and to this end accelerated aging tests can help identify degradation mechanisms that arise over the long term. Here, oxygen‐induced degradation of archetypal perovskite solar cells under operation is observed, even in dry conditions. With prolonged aging, this process ultimately drives decomposition of the perovskite. It is deduced that this is related to charge build‐up in the perovskite layer, and it is shown that by efficiently extracting charge this degradation can be mitigated. The results confirm the importance of high charge‐extraction efficiency in maximizing the tolerance of perovskite solar cells to oxygen.
The power conversion efficiency in a conjugated polymer-functionalized fullerene bulk heterojunction organic photovoltaic (OPV) device is dependent both on the electronic properties of the constituent materials and on the nanoscale morphology of the active semiconductor layer thin-film. Here we use in situ ellipsometry and grazing incidence X-ray scattering (GI-XS) to study molecular self-organization in poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl C61-butyric acid methyl ester (PCBM) blend films in real time, during the drying process as they are cast from solution. We illustrate the evolution of the extinction coefficient from a solution to a solid, semi-crystalline state. We show that once the solvent fraction in the film falls below 50%, the P3HT undergoes rapid crystallization via heterogeneous nucleation; a process that is complete in seconds. We also evidence a rapid, dynamic self-annealing process that reduces the characteristic lamella spacing in the P3HT crystallites. The mechanistic understanding of film-formation demonstrated here is an important component in optimizing deposition processes suitable for large-area OPV manufacture.