As micro-LEDs are further miniaturized for applications in high-resolution displays, size is becoming increasingly important for overall efficiency. To achieve high internal quantum efficiency, non-radiative recombination processes at the sidewall must be well understood and adequately mitigated. For this purpose, blue InGaN/GaN micro-LEDs were defined under two different dry etching conditions by changing the plasma power and Ar/Cl2 ratio, resulting in LEDs that were either stronger physically etched or stronger chemically etched. The LEDs were investigated using monochromatic cathodoluminescence imaging and time-resolved cathodoluminescence to determine how the etching conditions affect the detrimental influence of the sidewall on the quantum efficiency. A significant reduction of cathodoluminescence intensity and lifetime of the stronger physically etched structure from the bulk material toward the sidewall is observed, which is caused by an increase in the non-radiative recombination activity. Conversely, the stronger chemical etching conditions do not lead to a considerable degradation of the luminescence properties near the sidewall, which is attributed to the passivation of near-surface point defects with hydrogen during the etching process. This is corroborated by the intentional depassivation of such defects by low-energy electron beam irradiation or thermal annealing in an inert gas atmosphere leading to a similar efficiency deterioration, as well as by the recovery of efficiency by hydrogen plasma treatment. Overall, the results demonstrate that hydrogen can very effectively restore the efficiency of micro-LEDs at the sidewall. Therefore, the possible influence of hydrogen on the point defects at the sidewall should be considered in future studies investigating sidewall treatments.
Micro-LEDs generally suffer a loss of efficiency when they are reduced in size, as the sidewall has an increasingly greater impact on overall performance and promotes non-radiative surface recombination. However, as small micro-LEDs are in high demand due to promising applications in high-resolution displays, the influence of the sidewall must be well understood and mitigated by improvements in fabrication, e.g., directly during the etching process or by surface treatment. To improve the sidewall quality, blue InGaN/GaN micro-LEDs were defined under two different dry etching conditions by changing the plasma power and Ar/Cl2 ratio, and their sidewalls were treated either by plasma-enhanced chemical vapor deposition of SiOx or KOH wet chemical etching. The influence of the different surface conditions is analyzed by cathodoluminescence experiments to investigate how the distance between the excitation area and the sidewall affects the luminescence behavior. The distance dependence is significantly different for the investigated etching conditions, which is attributed to different degrees of surface passivation by hydrogen incorporated during dry etching. In addition, strong differences are observed for excitation close to or far from the sidewall, which cannot be explained only by differences in surface recombination, but can be ascribed to lateral confinement of charge carriers by the sidewall restricting spreading by diffusion. Lastly, the results strongly suggest that KOH etching not only removes the surface damaged by the etching process, but also improves the sidewall quality most likely due to the interaction of the etching by-product NH3 with GaN.