22 April 2022 in IEEE/ASME Transactions on Mechatronics
Despite efforts to circumvent and alleviate the impact of a mid-flight collision, it remains extremely challenging to safeguard a multirotor vehicle when it operates in cluttered environments. In this work, we introduce a flying robot with the ability to roll through a gap narrower than its diameter to prevent a possible aerial collision entirely. The novelty of the proposed design lies in a simple passive mechanism that redirects the propelling thrust for the terrestrial operation without the need for extra actuators. As a result, the robot remains compact and lightweight. Furthermore, to overcome the underactuation associated with the passive structure, the transitions between flight and rolling are accomplished with a highly dynamic maneuver. In the experimental demonstration, the robot seamlessly switched between the aerial and terrestrial locomotion to safely negotiate a 10-cm opening.
10 April 2024 in Science Robotics
Nature abounds with examples of superior mobility through the fusion of aerial and ground movement. Drawing inspiration from such multimodal locomotion, we introduce a high-performance hybrid hopping and flying robot. The proposed robot seamlessly integrates a nano quadcopter with a passive telescopic leg, overcoming limitations of previous jumping mechanisms that rely on stance phase leg actuation. Based on the identified dynamics, a thrust-based control method and detachable active aerodynamic surfaces were devised for the robot to perform continuous jumps with and without position feedback. This unique design and actuation strategy enable tuning of jump height and reduced stance phase duration, leading to agile hopping locomotion. The robot recorded an average vertical hopping speed of 2.38 meters per second at a jump height of 1.63 meters. By harnessing multimodal locomotion, the robot is capable of intermittent midflight jumps that result in substantial instantaneous accelerations and rapid changes in flight direction, offering enhanced agility and versatility in complex environments. The passive leg design holds potential for direct integration with conventional rotorcraft, unlocking seamless hybrid hopping and flying locomotion.
13 June 2023 in Communications Engineering
The flight time of aircraft rapidly decreases with smaller scales because the lift-to-drag ratio decreases when scaling down. Aerial-surface locomotion, or perching is one energy efficient solution to prolong the fight time by maintaining the drone at a high vantage point. Current perching strategies require additional components to ensure robots firmly attach to the surfaces, and able to detach afterwards, resulting in increased power consumption owing to the added weight. Here, we report a 32-g rotorcraft with the ability to repeatedly perch and take off from overhangs and walls on different wet and dry substances. A propelling thrust is used to support the robot to keep rotorcraft balance against the surface. Integrating with the mussel-inspired wet adhesives, the rotorcraft dispenses the additional components required for attachment and taking off. The final rotorcraft is 32.15 g, only 1.09 g heavier than the original prototype, but shows a 50% and 85% reduction in power consumption when perching on ceilings and walls respectively. The saved power leads to a fourfold increase in the total mission time.
26 October 2023 in npj Robotics
The small footprint of tiny multirotor vehicles is advantageous for accessing tight spaces, but their limited payload and endurance impact the ability to carry powerful sensory and computing units for navigation. This article reports an aerodynamics-based strategy for a ducted rotorcraft to avoid wall collisions and explore unknown environments. The vehicle uses the minimal sensing system conventionally conceived only for hovering. The framework leverages the duct-strengthened interaction between the propeller wake and vertical surfaces. When incorporated with the flight dynamics, the derived momentum-theory-based model allows the robot to estimate the obstacle’s distance and direction without range sensors or vision. To this end, we devised a flight controller and reactive navigation methods for the robot to fly safely in unexplored environments. Flight experiments validated the detection and collision avoidance ability. The robot successfully identified and followed the wall contour to negotiate a staircase and evaded detected obstacles in proof-of-concept flights.
24 May 2023 in IEEE Robotics and Automation Letters
This letter reports an aerial robot–Quadrolltor, with the ability to roll and turn. Existing bimodal quadrotors feature cylindrical rolling cages that are rotationally decoupled from the robot's main rigid body. In contrast, the proposed robot employs passively reconfigurable structures to enable the second mode of locomotion, tightly coupling the attitude of the robot to the rolling cage. The benefits are precise rolling and turning control as well as improved rolling efficiency. Experiments were conducted to comprehensively validate the hybrid locomotion. The robot leveraged the superior maneuverability in the rolling mode to take photos of the surroundings at different tilting and panning angles to construct a panoramic image. Besides, the results of the power measurements show a significant reduction in the cost of transport brought by at low speed, equating to a 15-fold extension in the operational range.
7 February 2022 in IEEE Robotics and Automation Letters
Traditional fixed-wing vehicles are equipped with multiple active aerodynamic surfaces for flight control. This inevitably necessitates several actuators, complicates the mechanical structure, and adversely impacts the flight efficiency, particularly for small aerial vehicles. As a lightweight and efficient solution, this work proposes to employ passive variable-sweep wings on a micro airplane to eliminate the need for active control surfaces while retaining effective pitch maneuverability. Depending on the thrust produced by the propellers, the wings passively sweep back and forth, relocating the center of pressure and affecting the pitch moment. The thrust-induced deformation substitutes the elevators for pitch control. Through aerodynamic modeling, the flight dynamics of the proposed vehicle is analyzed. The results show that the proposed design brings about amplified and accelerated pitch response. Lastly, a prototype was constructed to demonstrate and verify the enhanced aircraft’s pitch control ability.