3 September 2024 in International Journal of Robotics and Control Systems
This paper presents the design of a Nonlinear Model Predictive Controller (NMPC) for a wheeled Omnidirectional Mobile Robot (OMR) in order to track a desired trajectory in the presence of previously unknown static and dynamic obstacles in the environment around the robot. A laser rangefinder sensor is used to detect the obstacles where each obstacle occupies numerous points of every sensor reading. The points that belong to each obstacle are then clustered together using the Density-Based Spatial Clustering of Applications with Noise (DBSCAN) algorithm. This research introduces a novel approach to represent obstacles as multiple rotated ellipses, enabling a more accurate representation of complex obstacle shapes without overestimating their boundaries, thereby allowing the robot to navigate through narrow passages. CoppeliaSim robotic simulator is utilized to create the virtual simulation environment as well as simulate the OMR dynamics. MATLAB with the help of the CasADi toolbox is used for the process of the laser rangefinder readings and the implementation of NMPC, respectively. To validate the effectiveness and robustness of the proposed approach, three simulation scenarios are conducted, each involving distinct trajectories and varying densities of static and/or dynamic obstacles. The proposed control architecture exhibits remarkable performance, enabling the OMR to effectively navigate through narrow passages and avoid multiple static and dynamic obstacles while closely adhering to the desired trajectory.
20 March 2022 in Turkish Journal of Science and Technology
This paper aims to design and implement an indoor localization method for mobile robots based on trilateration technique, Color Code signatures (CCs) as artificial passive beacons, and a depth camera. The artificial passive beacons are designed as three disks positioned one on top of the other’s with different sizes and colors (primary colors only, RGB). The three disks share the same center. The designed beacons are placed on the ceiling to be visible from most locations within the room. The robot's model, controller, and localization method are implemented and evaluated inside the CoppeliaSim environment. The simulation results show that the CCs detecting algorithm enables the robot to discover the designed beacons, achieve an accurate localization and reach the target
17 November 2024 in Turkish Journal of Engineering
The component-wise control technique in Sliding Mode Control (SMC) offers notable advantages, such as enhanced accuracy and a faster-reaching phase compared to more complex MIMO SMC methods. However, these benefits are accompanied by significant challenges, particularly in determining appropriate control gains for each channel. This process involves solving a set of inequalities, which may not always yield a feasible solution. This letter introduces a novel approach to component-wise SMC design for a two-link manipulator and provides a comprehensive analysis of the uncertainty conditions that lead to feasible control gain solutions, thereby streamlining the design process. Simulation results demonstrate the superior performance of the proposed controller, even under uncertainties in the system dynamics.