Underground cavities are ubiquitous across northern Europe's cities and countryside due to a long history of mining and building‐stone extraction. Management of cavity‐collapse risks requires detailed knowledge of a cavity's geometry, depth and rock‐mass characterisation. Current mapping practices are neither sufficiently accurate, detailed nor cost‐effective in underground settings. Here, a GeoSLAM Zeb‐Revo handheld mobile laser scanner was tested. Its point clouds reproduced planes faithfully (RMS < 10 mm) over typical gallery dimensions (<10 m) and any survey horizontality defect was not measurable. In well‐structured corridor networks, reference distance inaccuracy arising after a 115 m loop and 5·25 minutes of instrumental drift did not exceed 3 mm over 30 m (1:10 000) and the difference from the reference length was insignificant. Applied to mapping 11 ha of a disused underground stone quarry in the Paris Basin, Zeb‐Revo surveys produced accurate (<1 m) base maps adequate for regulatory cavity hazard maps at 1/5000 scale. Geometric knowledge of accessible cavities is therefore no longer a challenge for collapse hazard mapping.
La Revue Française de Géotechnique (RFG) est une publication scientifique parrainée par les comités français de mécanique des sols, de mécanique des roches, de géologie de l’ingénieur et des géosynthétiques
Acid mine drainages (AMDs) are a major environmental problem, but they can also contain valuable metals. A typical treatment of AMDs consists in the neutralization and precipitation of metals by liming, which produces a sludge mainly composed of iron oxyhydroxides and gypsum. Depending on the AMD composition, the sludge can contain important concentrations of valuable metals. This research work aimed at studying acid leaching of copper and zinc present in the sludge with the final goal of developing a process to recover these metals. Tests were carried out using sludge from a former mining site in France. The first stage of this process involves a leaching stage to selectively dissolve Cu, Zn, and Cd using H 2 SO 4 . This process allows more than 80% of Cu and Zn as well as 98% of Cd in the sludge to be leached under optimal operating conditions, which are between 5% and 15% of solid content and between 150 and 200 g H 2 SO 4 ·kg –1 at room temperature. Using more acid marginally increases the dissolution rates but at the cost of much higher acid consumption linked to the dissolution of iron and therefore a loss of selectivity.