Passivating traps in perovskites: Low-temperature processing of planar organic-inorganic perovskite solar cells made through solution processing would allow for simpler manufacturing and the use of flexible substrates. However, materials currently in use form interfaces with charge carrier trap states that limit performance. Tan et al. used chlorine-capped TiO 2 colloidal nanocrystal films as an electron-selective layer, which limited interface recombination in solution-processed solar cells. Such cells achieved certified efficiencies of 19.5% for active areas of 1.1 cm 2 . Science , this issue p. 722
Electrochemically etched α-Co(OH)2–Cl, due to the dechlorination-induced defective structures and in situ formation of CoOOH fragments, are highly active for OER.
7 November 2013 in Journal of Materials Chemistry A
In this paper, a free radical assisted strategy was introduced into the functionalization of counter electrode materials for the first time. With the assistance of a radical initiator, short-chained thiol groups can be attached on a multi-walled carbon nanotube (MWCNT) surface covalently, which was confirmed to be beneficial for both controlling the particle growth of platinum (Pt) on MWCNTs and improving the electron transfer between counter electrode materials and the substrate. The obtained Pt–MWCNT composite has been applied as a counter electrode material for dye-sensitized solar cells, and the power conversion efficiency (η) was detected to be 8.62%, surpassing that of the cell with a conventional Pt counter electrode (η = 7.56%). Especially, the fill factor improved considerably from 0.57 to 0.65.
24 January 2017 in Journal of Materials Chemistry A
A difunctional counter electrode composed of platinum nanoparticles supported on regular In 2 O 3 nanooctahedra demonstrates good catalytic activity and excellent light scattering.